Darwin Core RDF guide

On this page

Darwin Core RDF guide

Title
Darwin Core RDF guide
Date version issued
2021-07-15
Date created
2015-03-27
Part of TDWG Standard
http://www.tdwg.org/standards/450
This version
http://rs.tdwg.org/dwc/terms/guides/rdf/2021-07-15
Latest version
http://rs.tdwg.org/dwc/terms/guides/rdf/
Previous version
http://rs.tdwg.org/dwc/terms/guides/rdf/2016-04-25
Abstract
This guide is intended to facilitate the use of Darwin Core terms in the Resource Description Framework (RDF). It explains basic features of RDF and provides details of how to expose data in the form of RDF using Darwin Core terms and terms from other key vocabularies. It defines terms in the namespace http://rs.tdwg.org/dwc/iri/ which are intended for use exclusively with non-literal objects.
Contributors
Steve Baskauf (Vanderbilt University Department of Biological Sciences), John Wieczorek (VertNet), John Deck (Genomic Biodiversity Working Group), Campbell Webb (TDWG RDF/OWL Task Group), Paul J. Morris (Harvard University Herbaria/Museum of Comparative Zoölogy), Mark Schildhauer (National Center for Ecological Analysis and Synthesis)
Creator
Darwin Core and RDF/OWL Task Groups
Bibliographic citation
Darwin Core and RDF/OWL Task Groups. 2021. Darwin Core RDF guide. Biodiversity Information Standards (TDWG). http://rs.tdwg.org/dwc/terms/guides/rdf/2021-07-15

1 Introduction (non-normative)

Each method of encoding information using Darwin Core has a guide explaining how to use the Darwin Core terms in that situation. This is the guide for encoding biodiversity data using the Resource Description Framework.

The Darwin Core RDF Guide is targeted toward those who wish to share biodiversity data described by Darwin Core (DwC) properties using RDF. It describes how community best practices for expressing fundamental information about resources using RDF relate to Darwin Core terms, and clarifies how Darwin Core terms should be used in RDF with literal (string) and non-literal (IRI reference) objects. It is not intended to explain the model and syntax of RDF. For a general introduction to RDF in a biodiversity context, see the Beginner’s Guide to RDF. For a more detailed introduction to RDF, see the RDF Primer.

1.1 Status of the content of this document

Sections of this document are explicitly identified as either normative or non-normative. All numbered examples are non-normative, even if they fall within sections designated as normative. Tables may be designated as non-normative, even if they fall within sections designated as normative.

1.1.1 RFC 2119 key words

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they are written in capitals (as shown here).

1.2 Rationale (non-normative)

Darwin Core is a vocabulary that provides terms that can be used to describe the properties and types of entities (known in RDF as “resources”) in the biodiversity realm. Darwin Core is a general purpose vocabulary because its terms can be used as part of a number of data transfer systems. RDF differs in several important ways from other data transfer systems for which DwC usage guides exist (Text Guide and XML Guide). By its nature, RDF is a distributed system. It is assumed that data from one provider will be linked to data from other providers. This also implies that it is always possible to discover new data properties about a particular resource and that those properties may be described using unfamiliar terms. This differs significantly from other data transfer systems where there needs to be a pre-existing agreement (in the form of a federation schema or human-understandable document) between the sender and receiver about the format of the data and the organization and interpretation of the terms within records. Because RDF is intended to facilitate data and metadata discovery by machines (actually computer programs known as semantic clients or just “clients”), the meaning and use of terms needs to be well-defined and discoverable by clients without human intervention. To facilitate cross-referencing of resources among different data providers, resources need to be identified using standardized, machine-understandable, and globally unique identifiers known as internationalized resource identifiers (IRIs). Finally, because anyone can make statements about a resource without agreeing to a pre-determined schema, RDF by its nature is a highly normalized network of relationships, in contrast to typical database tables which are by their nature “flat”. Because of these differences, effective use of RDF requires that its users adhere to what are essentially evolving social conventions about identifiers, data transfer protocols, and application of vocabularies. Some of these conventions will be described in the following sections.

1.3 Features of RDF (non-normative)

This section describes some of the basic features of RDF. It is not intended as a tutorial on RDF, but rather to provide enough information about the features of RDF to explain why specific guidelines for the use of Darwin Core in RDF are necessary and why an additional Darwin Core namespace has been created.

1.3.1 Serialization and syntax (non-normative)

The RDF model itself is independent of any specific serialization syntax. The following diagram represents a set of facts about an image in a graphical form easily understood by humans.

Each arrow represents a statement about the image, called a “triple” in RDF. The set of triples is called an RDF graph. Resources (represented by ovals) are identified by IRIs. The described resource (in this example the image <http://bioimages.vanderbilt.edu/kirchoff/ac1490> at the tail of the arrow) is called the subject of the triple. Properties of the subject resource are identified by term IRIs shown here with their namespaces abbreviated (e.g., dcterms: = http://purl.org/dc/terms/). The property is called the predicate of the triple. The values of the properties are called the object of the statement, with literal values (consisting of text) represented by rectangles.

This RDF graph can be serialized in a somewhat human-friendly syntax called Terse RDF Triple Language (Turtle):

@prefix rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>.  
@prefix xsd: <http://www.w3.org/2001/XMLSchema#>.  
@prefix dcterms: <http://purl.org/dc/terms/>.  
<http://bioimages.vanderbilt.edu/kirchoff/ac1490>a <http://purl.org/dc/dcmitype/StillImage>;  
       dcterms:created "2010-09-01T03:41:31"^^xsd:dateTime;  
       dcterms:creator <http://bioimages.vanderbilt.edu/contact/kirchoff#coblea>.

Here is the graph in RDF/XML syntax:

<?xml version="1.0" encoding="UTF-8"?>  
<rdf:RDF  xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"  
xmlns:dcterms="http://purl.org/dc/terms/"  
>  
 <rdf:Description  rdf:about="http://bioimages.vanderbilt.edu/kirchoff/ac1490">  
   <rdf:type  rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
   <dcterms:creator  rdf:resource="http://bioimages.vanderbilt.edu/contact/kirchoff#coblea"/>  
   <dcterms:created  rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2010-09-01T03:41:31</dcterms:created>  
 </rdf:Description>  
</rdf:RDF>

In this document, the following formatting conventions will be used. Full IRIs will be enclosed in angle brackets, e.g.,

<http://bioimages.vanderbilt.edu/contact/kirchoff#coblea>

Abbreviated UIRIs will be shown as inline code in the form namespace:localName, e.g., rdf:type. Namespace abbreviations when shown by themselves will also be shown as inline code, e.g., dwc:. Examples will be displayed in code blocks.

XML is a widely understood form of RDF serialization. Therefore, all examples given here will be shown as RDF/XML. In most cases, they will also be shown in Turtle. For more detailed information about RDF serialization, see part 3 of the Beginner’s Guide to RDF and the references cited there.

1.3.2 Internationalized Resource Identifier (IRI) (non-normative)

Data providers make use of a variety of identifiers to refer to resources they wish to provide. These identifiers might be locally unique within the provider’s database, or they might be globally unique. Providers have sought to make their identifiers globally unique through such means as “Darwin Core Triplets” (institutionCode:collectionCode:catalogNumber) and creation of UUIDs. However, only identifiers in the form of IRIs can be valid subjects of statements (known as RDF triples) in RDF, so neither “Darwin Core Triples” nor UUIDs can be used in unmodified form for that purpose. IRIs are a superset of a narrower form of identifiers known as Uniform Resource Identifiers (URIs) that can be used in place of IRIs. This document will refer exclusively to IRIs with the understanding that URIs may be used in place of IRIs.

The most familiar form of IRI is a Uniform Resource Locator (URL) which not only identifies a resource, but also provides information about retrieving an information resource (i.e., a resource that can be transmitted in electronic form), such as text in the form of an HTML web page. In general, IRIs can also identify non-information resources (physical or conceptual entities) that are not transmittable electronically, e.g., <http://bioimages.vanderbilt.edu/contact/kirchoff#coblea>, a person. If a client attempts to retrieve a non-information resource by dereferencing its HTTP IRI, a process called content negotiation is used to refer the client to the IRI of an information resource representation of the non-information resource. For humans, this is usually a web page, while for semantic clients (machines) the representation is a document in the form of RDF/XML. For more detailed information about IRIs see part 1 of the Beginner’s Guide to RDF and the references cited there.

1.3.2.1 Persistent Identifiers (normative)

Best practices dictate that identifiers (known as persistent identifiers or globally unique identifiers: GUIDs), which are used to identify resources of permanent interest, SHOULD be globally unique, referentially consistent, and persistent (TDWG Globally Unique Identifiers (GUID) applicability statement:). If those identifiers are to be used to identify subject resources in RDF, they MUST also be in the form of an IRI. This has two implications for data providers.

First, if a non-IRI globally unique identifier is used to identify a subject resource, it MUST be converted to an IRI by making it conform to a well-known IRI scheme (e.g., a URN or HTTP IRI). For example, a UUID can be transformed into a URN by prefixing its string representation with urn:uuid: as in

<urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6>

Similarly, ISBNs can be converted to URNs as shown in Examples 13 and 14. Although these URNs are valid IRIs, they have the disadvantage that they are not actionable (see Section 1.3.2.2). In contrast, the “Darwin Core triplet”

MVZ:Mamm:165861

has been turned into an actionable IRI by appending it to the base string http://arctos.database.museum/guid/:

<http://arctos.database.museum/guid/MVZ:Mamm:165861>

Second, if a provider refers to a resource using an URL that provides data about the resource, the provider SHOULD ensure that the URL does not change over time (e.g., if the content moves to a different server, if the directory structure changes, or if a new version of the database is introduced). To improve stability, the information provider MAY use content negotiation to redirect the user from a persistent IRI that refers to the resource to the URL of a web page which describes the resource.

For a more detailed introduction to persistent identifiers, see the GBIF Beginner’s Guide to Persistent Identifiers.

Based on the precedent set by the TDWG LSID Applicability Statement standard, it is RECOMMENDED that URN-based IRIs be related to HTTP-proxied equivalents (if they exist) as described in Section 2.2.3.

1.3.2.2 HTTP IRIs as self-resolving GUIDs (normative)

Advocates of principles of Linked Data prefer to use identifiers that follow the HTTP IRI scheme, known as “HTTP IRIs”. In addition to being globally unique, such identifiers have the advantage of being dereferenceable using a widely implemented protocol. As such, it is possible to implement HTTP IRIs so that a human end user can obtain information about the resource using a conventional web browser. It is also possible to implement HTTP IRIs so that data (in the form of RDF) describing the resource can be discovered by a semantic client. In recognition of the advantages conferred by HTTP IRIs, the TDWG GUID Applicability Statement standard specifies in Recommendation 2 that “HTTP GET resolution must be provided for non-self-resolving GUIDs”. For this reason, providers of biodiversity information who intend to make data available through RDF SHOULD plan to implement GUIDs that are persistent HTTP IRIs. This is not to the exclusion of other forms of non-self-resolving globally unique identifiers that can be associated with the HTTP IRI using the methods described in Section 2 of this guide.

1.4 Use of terms in RDF

1.4.1 Well-known vocabularies (non-normative)

Because RDF assumes no pre-existing agreement between data providers and consumers about the terms used as properties to describe resources, the likelihood that a consuming client will “understand” the meaning of an RDF triple will be increased if the provider uses terms from a well-known vocabulary. Some well-known general and biodiversity-related vocabularies are listed in the Introduction to the Beginner’s Guide to RDF. If no well-known term exists to represent a property needed to describe a resource, a data provider MAY “mint” its own term. In that case, the provider SHOULD assign the term an IRI, define the term in RDF, provide clear human-understandable documentation of how the term should be used, provide for dereferencing of the IRI, and commit to the long-term stability of the term IRI and definition.

1.4.2 Appropriate use of terms (normative)

Because of the machine-oriented nature of RDF, a provider MUST assume that a consuming client will not infer any meaning from a statement other than what is directly stated or what can be inferred logically from other statements made about the resources and terms involved in the statement. For example, a provider might use the name of a resource in a triple with the intention that the name represent the resource itself. However, if the term used as the predicate in the triple is designed to refer to resources themselves rather than names of resources, the client may fail to make the connection between the name and the resource itself. Depending on how the term is defined, the client may detect an inconsistency or draw unintended conclusions as described below. Inappropriate use of terms as RDF predicates can have unintended consequences because, unlike text-based data transfer protocols, RDF is designed to allow clients to infer additional facts based on information contained in the definitions of the terms. For example, the definition of the term foaf:depicts contains a statement declaring its domain to be foaf:Image. Thus a provider that describes a resource using a foaf:depicts property is also implicitly (and perhaps unknowingly) declaring the resource to be an image. Terms that are defined using a form of RDF known as Web Ontology Language (OWL) can have restrictions placed on their use. For example, declaring a term to be an owl:ObjectProperty indicates that it is inconsistent for the value of that property to be a string literal (i.e., the value is expected be an IRI).

For these reasons, terms SHOULD be used as predicates in RDF only after the data provider has carefully examined the documentation and usage guidelines associated with the vocabulary or ontology that defines the term and has determined that use of that term is consistent with the meaning the provider intends to impart to the triple in which the term is to be used as a predicate.

For more detailed information about the implications of using terms that have range, domain, and subproperty declarations in RDF, see part 4 of the Beginner’s Guide to RDF. For more detailed information about how OWL is used to define complex properties of terms in RDF, see part 7 of the Beginner’s Guide to RDF.

1.4.3 Use of Darwin Core terms in RDF (normative)

The general Darwin Core vocabulary, whose terms are in the dwc: namespace (http://rs.tdwg.org/dwc/terms/), is designed primarily to facilitate the transfer of text-based records from relatively “flat” database tables. Because of this, the term recommendations associated with the general vocabulary suggest using text strings to refer to physical and conceptual entities, i.e., names to represent people, citations to represent articles, codes to represent institutions, etc. The several kinds of roles intended for text strings are detailed in Section 1.5. When a record has multiple values for a property, the general Darwin Core term definitions specify that the multiple strings be concatenated and delineated in a single field to avoid forcing the creation of a more normalized data structure.

However, in RDF, identification of physical and conceptual entities is generally accomplished by IRI references rather than literals. If there are multiple values for a property, each value MUST be referenced in a separate triple. Thus we face a situation where it is desirable in the context of RDF for certain DwC properties to be represented by one to many triples having non-literal (IRI reference) objects, while the actual definitions of the terms in the general DwC vocabulary that represent those properties specify that a single literal (text string) object be provided.

In a perfect world, all data providers wishing to serve RDF would immediately replace literal references to physical and conceptual resources (names, citations, codes, etc.) with IRI GUIDs that identify those resources and that are reused by other members of the community. However, it is more realistic to assume that, at least initially, many providers will have few (if any) GUIDs available to use as IRI references, so requiring non-literal resources to be referenced exclusively by IRIs would impede the exposure of data in the form of RDF. Therefore, it would be advantageous to provide an alternative set of DwC terms intended for use in RDF with IRI-referenced objects, while continuing to use the general DwC terms for literal objects where providers are unable to convert their existing (string) database fields to IRI references.

This guide introduces the namespace dwciri: (http://rs.tdwg.org/dwc/iri/) whose terms are intended for use with non-literal objects. If a term in the dwciri: namespace has an analogue in the dwc: namespace with the same local name, the dwciri: term SHALL have the same meaning as its dwc: counterpart. For example, dwciri:recordedBy has the same meaning as dwc:recordedBy, but as an RDF predicate dwciri:recordedBy is intended to be repeatable and have an IRI-reference object. Providers whose databases include the field dwc:recordedBy with records containing concatenated lists of names MAY publish those values immediately as single RDF triples using dwc:recordedBy as the predicate and containing one literal object, which is the concatenated list string. In this manner, publication of data as RDF can begin immediately using the dwc: terms without the requirement that every resource have an assigned IRI GUID. As the community develops mechanisms for discovering and reusing IRIs, data providers can make the shift to dwciri: terms. As a part of their data updating and cleaning process providers or aggregators may eventually parse the strings, search a community IRI repository, and match strings with existing IRIs or create new ones if they do not already exist.

1.4.4 Limitations of this guide (non-normative)

This guide provides general guidance about how Darwin Core property terms can be used as RDF predicates and specifies that Darwin Core class terms should be used in rdf:type declarations (Section 2.3.1.5). However, the Darwin Core standard does not specify precisely which resources are to be included as instances of its classes nor does it declare domains for its property terms. Although the Darwin Core Quick Reference Guide suggests which properties might be applied to instances of classes by organizing those property terms under class headings, Darwin Core leaves specific decisions about type declaration and property assignment to community consensus. Some examples that show varying approaches to assigning resources to Darwin Core classes and connecting them with object properties defined outside Darwin Core are provided in the Darwin Core informative ancillary web page.

1.5 Roles of text strings as values of properties in dwc: namespace (non-normative)

When humans communicate in written language, they use strings of text characters to impart meaning. In some cases text strings may have a relatively unambiguous meaning. However, in many cases the exact meaning of a text string will depend on the context in which it is used. Take, for example, the text string “Germany”. That string might be intended to refer to a location bounded by some agreed-upon geographical borders. It may be intended to refer to a political entity, i.e., “the government of Germany”. It might be intended to refer to an entity that includes all of the inhabitants living with certain geographical borders, i.e., “the people of Germany”. It might also be intended to be a name recorded in a certain language. Is “Germany” the same as “Deutschland”? Does “Germany” mean the same thing as the code “DE”? Is “Germany” the same as “Federal Republic of Germany”? The answers to all of these questions depends on what one means by “Germany”.

In text-based data transfer systems, text strings are the predominant means by which information is conveyed. It would be a relatively simple matter to simply “translate” existing Darwin Core text-based data into RDF by making every string value be the literal object of a predicate that is the Darwin Core property. But that would not result in RDF that conveys the kind of “meaning” that RDF was designed to impart.

Because text-based systems depend on predetermined understandings about the meanings of data fields, users are not forced to consider carefully the role that the string values are intended to play. However, in RDF one cannot assume that a client will “know what I mean” when a string is provided. For that reason, it is worth examining the kinds of meanings that we intend when we provide string values for Darwin Core properties in the dwc: namespace.

1.5.1 Situations where a string is the standard means for encoding a resource (non-normative)

Numbers, dates, and titles are resources that are essentially conceptual, but whose meaning can be imparted rather completely and concisely by a string. This is particularly true if an datatype encoding scheme is specified for the string or if a language attribute is used to indicate the language of the title. In this situation, there is virtually no need to provide additional information about the resource other than the string itself. A literal object is sufficient in itself.

1.5.2 Situations where a string value serves as a proxy for a non-information resource (non-normative)

Humans commonly use name strings to represent resources that are physical or conceptual (i.e., non-information) resources. For example, the string “Vincent van Gogh” is used to represent the person whose name was Vincent van Gogh. If we made the statement “Starry Night” createdBy “Vincent van Gogh”, we do not mean that “Starry Night” was created by the name “Vincent van Gogh”, but rather that “Starry Night” was created by the person whose name was Vincent van Gogh. For that matter “Starry Night” is the name for a painting and we probably actually mean that the person Vincent van Gogh created the painting rather than the name of the painting (although he probably created both!). Unlike the first situation, such name strings themselves do not contain nearly all of the information that one might want to know about that non-information resource (e.g., date of creation, location during a certain period of time, etc.), but they can serve as an identifier for the resource. In RDF, machine-processable IRIs are preferred over string names as identifiers for resources.

1.5.3 Situations where a string value serves as a keyword to enable searching (non-normative)

Imagine that a person identifies an oak tree as “Quercus alba”. The data associated with that identification may provide the property/value pair dwc:scientificName="Quercus alba". This implies that the person asserted that the tree was a representative of a taxon associated with the name Quercus alba. The data associated with the identification might also provide the property/value pair dwc:order="Fagales". One might think that this would imply that the person who asserted the identification also asserted that the tree was included in the order Fagales. However, it is likely that the person did not make such an assertion and in fact may have never even heard of the order Fagales. Rather, a database manager subscribing to a particular taxonomic hierarchy asserted that all identifications with a dwc:scientificName value of “Quercus alba” will also have a property/value pair of dwc:order="Fagales” in order to allow users of the database to search for identifications that were related because they shared the common value for that dwc:order property.

The point is that in order to more accurately describe the real situation, there ought to be two separate sets of information: one that asserts that the person identified the tree as a representative of a taxon for which the scientific name “Quercus alba” is applied, and one that asserts the relationship between that taxon and higher taxa such as one to which the name “Fagales” is applied.

1.5.4 Situations where a string value serves as an identifier (non-normative)

A number of Darwin Core properties specify that their values ought be an identifier. There is significant ambiguity in the use of these properties because, depending on the situation, the value may be an identifier for the subject resource itself or it may be the identifier for a resource that is related in some way to the subject resource. In addition, Darwin Core sometimes suggests (but does not require) a GUID as a value, but does not require that the GUID be either an HTTP IRI nor an IRI in general.

1.5.5 Implications for expressing Darwin Core string values as RDF (non-normative)

To facilitate achieving the clarity that RDF makes possible, this guide provides different approaches for each of these four situations in which string values are provided. In the first three situations, the existing term from Darwin Core namespace dwc: can be used with a literal value to expose the string value as it currently exists in a text-based database. This allows for the rapid deployment of RDF described in Section 1.4.3 and is all that is needed in the first situation (Section 1.5.1). In the second situation (Section 1.5.2), analogues of the existing dwc: terms have been created in the dwciri: namespace, which are intended to be used with IRI-references rather than names. In the third situation (Section 1.5.3), new dwciri: terms have been created to relate subject resources to IRI-identified object resources that form part of a hierarchy. If such a hierarchy already exists, the need is eliminated for separate terms (“convenience terms”) that relate the subject resource to all parts of the hierarchy, although those terms can still be used if they are convenient for facilitating string searches. The last situation (Section 1.5.4) is more complex and a significant part of the implementation guide is devoted to the ways in which RDF ought to be structured to handle various kinds of identifiers.

2 Implementation guide

2.1 Definitions

2.1.1 Namespace abbreviations used in XML qualified names (QNames) in this document (non-normative)

Table 1

vocabulary name namespace abbreviation full prefix
Resource Description Framework rdf: http://www.w3.org/1999/02/22-rdf-syntax-ns#
RDF Schema rdfs: http://www.w3.org/2000/01/rdf-schema#
XML Schema xsd: http://www.w3.org/2001/XMLSchema#
Web Ontology Language owl: http://www.w3.org/2002/07/owl#
Darwin Core terms (string literal objects) dwc: http://rs.tdwg.org/dwc/terms/
Darwin Core terms (IRI reference objects) dwciri: http://rs.tdwg.org/dwc/iri/
Dublin Core terms dcterms: http://purl.org/dc/terms/
Dublin Core legacy terms dc: http://purl.org/dc/elements/1.1/
Dublin Core type vocabulary dcmitype: http://purl.org/dc/dcmitype/
FOAF vocabulary foaf: http://xmlns.com/foaf/0.1/
DBpedia resources dbres: http://dbpedia.org/resource/
GeoNames Ontology gn: http://www.geonames.org/ontology#
GeoSciML Geologic Timescale model Ontology gsml: http://resource.geosciml.org/ontology/timescale/gts-30#
Virtual International Authority File viaf: http://viaf.org/viaf/
Extensible Metadata Platform Rights Management vocabulary xmpRights: http://ns.adobe.com/xap/1.0/rights/

For brevity, the examples do not include namespace declarations, nor an rdf:RDF container element. If a user wishes to test or validate an example, insert it into the container element defined in Section 2.1.2.

2.1.2 Generating graphical diagrams and triple tables for the examples (non-normative)

The W3C RDF Validation Service can be used to generate both a tabular listing and a graphical diagram of the triples that are included in the example XML serializations. Text from the examples can be placed inside the rdf:RDF container element below, then pasted into the validator box to generate the desired output.

<?xml version="1.0" encoding="UTF-8"?>  
<rdf:RDF  xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"  
xmlns:rdfs="http://www.w3.org/2000/01/rdf-schema#"  
xmlns:xsd="http://www.w3.org/2001/XMLSchema#"  
xmlns:owl="http://www.w3.org/2002/07/owl#"  
xmlns:dwc="http://rs.tdwg.org/dwc/terms/"  
xmlns:dwciri="http://rs.tdwg.org/dwc/iri/"  
xmlns:dcterms="http://purl.org/dc/terms/"  
xmlns:dc="http://purl.org/dc/elements/1.1/"  
xmlns:dcmitype="http://purl.org/dc/dcmitype/"  
xmlns:foaf="http://xmlns.com/foaf/0.1/"  
xmlns:dbres="http://dbpedia.org/resource/"  
xmlns:gn="http://www.geonames.org/ontology#"  
xmlns:gsml="http://resource.geosciml.org/ontology/timescale/gts-30#"  
xmlns:viaf="http://viaf.org/viaf/"  
>  
… resource descriptions go here …  
</rdf:RDF>

2.1.3 Terminology (non-normative)

“Resource” is a general term for any kind of entity that can be described using RDF. Resources can be physical, conceptual, or digital entities. Statements about resources are made in RDF in the form of “triples”. A triple consists of a subject, a predicate, and an object:

Table 2

Subject Predicate Object
http://dbpedia.org/resource/Starry_night http://xmlns.com/foaf/0.1/maker http://viaf.org/viaf/9854560
dbres:Starry_night foaf:maker viaf:9854560

In the second row of Table 2, the full IRIs are given. In the third row, namespace abbreviations are used to shorten the IRIs. The following fragments of RDF show the triple in RDF/XML and Turtle serializations of the triple shown in Table 2:

Example 1:

RDF/XML

<rdf:Description  rdf:about="http://dbpedia.org/resource/Starry_night">  
     <foaf:maker  rdf:resource="http://viaf.org/viaf/9854560"/>  
</rdf:Description>

Turtle

<http://dbpedia.org/resource/Starry_night>
     foaf:maker <http://viaf.org/viaf/9854560>.

The Dublin Core Metadata Initiative (DCMI) Abstract Model, which was designed to be compatible with RDF, describes subject resources using property-value pairs, which correspond to pairs of predicates and objects. When referring to Dublin Core terms (as well as Darwin Core, which is modeled on Dublin Core) “property” is used synonymously with “predicate” and “value” is used synonymously with “object”. In Example 1, foaf:maker is a property and viaf:9854560 is the value associated with that property. Predicates have to be identified by IRIs. Objects of triples can be identified in three ways: 1) the object resource can be identified by an IRI reference, 2) the object can be identified by a non-IRI string, in which case it is called a literal, and 3) the object resource can also be left unidentified, in which case it is called a blank node or an anonymous node. Blank nodes are undesirable if it is important that other data providers be able to refer to the resource they represent. However, blank nodes might be preferable if external references to the resource are not relevant, or if the data provider is unable or unwilling to provide a stable IRI to identify the resource. IRI references and blank nodes can be the subjects of RDF triples, but literals cannot.

2.2 Subject resources (normative)

If the subject of an RDF triple is identified (i.e., not an anonymous node), it MUST be referenced by an IRI. This section describes how IRI identifiers are referenced in RDF and how non-IRI identifiers SHOULD be associated with the subject of the triple.

2.2.1 Identifying subject resources using IRIs (normative)

The rdf:about attribute of the rdf:Description element is used in RDF/XML to identify the subject of a triple:

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:165861">

2.2.2 Associating a string identifier with a subject resource (normative)

The Dublin Core term dcterms:identifier SHOULD be used to associate a string literal identifier (e.g., UUID, “Darwin Core Triplet”, or ARK) with an IRI-identified resource as shown here in RDF/XML:

<dcterms:identifier>58D31D52-713D-44B4-9FE9-CB2D9249C422</dcterms:identifier>  
<dcterms:identifier>MVZ:Mamm:165861</dcterms:identifier>  
<dcterms:identifier>ark:/12025/654xz321</dcterms:identifier>

If an HTTP IRI is considered to be the identifier for a subject resource, it MAY be provided as a string literal value for dcterms:identifier in addition to using it in the rdf:about attribute of the subject resource, as in Example 2:

Example 2:

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/kirchoff/b5161">  
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
     <dcterms:identifier>http://bioimages.vanderbilt.edu/kirchoff/b5161</dcterms:identifier>  
</rdf:Description>

2.2.3 Associating a URN with its HTTP-proxied equivalent (normative)

The TDWG LSID Applicability Statement standard specifies in Recommendation 30 that “The description of all objects identified by an LSID must contain an owl:sameAs, owl:equivalentProperty or owl:equivalentClass statement expressing the equivalence between the object identifier in its standard form and its proxy version”. This is illustrated by Example 3:

Example 3:

RDF/XML

<rdf:Description rdf:about="http://biocol.org/urn:lsid:biocol.org:col:35115">  
     <owl:sameAs rdf:resource="urn:lsid:biocol.org:col:35115"/>  
</rdf:Description>

Turtle

<http://biocol.org/urn:lsid:biocol.org:col:35115>
     owl:sameAs <urn:lsid:biocol.org:col:35115>.

Since LSIDs follow the URN IRI scheme, they MAY serve as the subject of any RDF triple. However, it is better to use the http-proxied form as the subject (i.e., the value of the rdf:about attribute) in the description of the resource. See the Darwin Core informative ancillary web page for more information about implementing LSIDs.

This practice MAY be extended to any URN. For example, owl:sameAs can be used to relate the URN <urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6> to its HTTP-proxied equivalent <http://provider.org/f81d4fae-7dec-11d0-a765-00a0c91e6bf6> in a manner analogous to Example 3.

2.3 Predicates (normative)

Most property terms in the Darwin Core vocabulary can be used as predicates in triples to represent properties of subject resources. The full term IRI MUST be used, although with an appropriate namespace declaration the namespace MAY be abbreviated (Section 2.1.1). RDF does not restrict the source of predicates, therefore Darwin Core terms MAY be mixed with terms from other vocabularies. This includes the important predicate rdf:type which is used to indicate the class of which the subject resource is an instance. There is no prohibition in RDF against repeating properties.

2.3.1 Declaring the type of the resource (non-normative)

In RDF, a resource can be characterized by declaring that it is an instance of a class. Indicating that a resource is an instance of a class provides several benefits. It allows a consumer to narrow the results of a search by limiting the search to certain types of resources. It suggests to data providers what sorts of properties should be used to describe a resource. It allows consumers to anticipate what sorts of properties they might expect to be provided for that resource and allows developers to build applications that exploit those expectations. Because of these benefits, RDF provides several built-in mechanisms for asserting class membership, most notably the rdf:type property, which is used to state that a resource is an instance of a class. There is nothing that prohibits assigning more than one rdf:type property to a resource. In fact, there can be a benefit in describing a resource as a member of both a class that has specific meaning within a narrow community and a more well-known class that has a broader meaning and is therefore more likely to be understood by generic clients. For instance, a resource can be typed as both a dwc:PreservedSpecimen and a dcmitype:PhysicalObject.

2.3.1.1 rdf:type statement (normative)

The predicate rdf:type is defined to have an object that is a class. The class MUST be identified by an IRI reference (not by a literal) as in Example 4:

Example 4:

RDF/XML

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/baskauf/12226">  
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
     <dcterms:created  rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2002-06-11T09:37:33</dcterms:created>  
</rdf:Description>

Turtle:

<http://bioimages.vanderbilt.edu/baskauf/12226>  
     a dcmitype:StillImage;  
     dcterms:created "2002-06-11T09:37:33"^^xsd:dateTime.

In Turtle serialization, rdf:type MAY be abbreviated as “a” (Example 4). In XML serialization, the RDF specification provides an abbreviated way to specify the type of a described resource. This method is called a typed node element. The rdf:Description element is replaced by an element whose name is an XML qualified name that identifies a class of which the described resource is an instance as in Example 5:

Example 5:

<dcmitype:StillImage rdf:about="http://bioimages.vanderbilt.edu/baskauf/12226"> <dcterms:created rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2002-06-11T09:37:33</dcterms:created>  
</dcmitype:StillImage>

This example serializes the exact same two triples as Example 4. The rdf:type triple is implied by the container element name.

2.3.1.2 rdf:type assertion through domain and range declarations (normative)

The RDF Schema (RDFS) specification defines two terms that assert rdf:type implicitly when certain predicates are used. When a predicate P having the property

P rdfs:domain C

is used to describe a subject resource, a client MAY infer that the subject resource is an instance of class C. For example, the term dcterms:bibliographicCitation is assigned the property

<rdfs:domain rdf:resource="http://purl.org/dc/terms/BibliographicResource"/>

in its definition. If that term were used as the property of a specimen, a client MAY infer that the specimen had rdf:type dcterms:BibliographicResource:

Example 6:

RDF/XML

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:165861">  
     <dcterms:bibliographicCitation>Ctenomys sociabilis (MVZ 165861)</dcterms:bibliographicCitation>  
</rdf:Description>

Turtle

<http://arctos.database.museum/guid/MVZ:Mamm:165861>  
     dcterms:bibliographicCitation "Ctenomys sociabilis (MVZ 165861)".

When a predicate P having the property

P rdfs:range C

is used with a value, a client MAY infer that the value is an instance of class C. The term dcterms:language is assigned the property

<rdfs:range rdf:resource="http://purl.org/dc/terms/LinguisticSystem"/>

in its definition. If the object of that term in an RDF triple is a reference to the IRI for English assigned by the MARC ISO 639-2 Codes for the Representation of Names of Languages (Example 7), then it MAY be inferred that <http://id.loc.gov/vocabulary/iso639-2/eng> is a dcterms:LingisticSystem even though the MARC description in RDF does not assert that directly in its definition.

Example 7:

RDF/XML

<rdf:Description rdf:about="http://dx.doi.org/10.5962/bhl.title.59991">  
     <dcterms:language rdf:resource="http://id.loc.gov/vocabulary/iso639-2/eng"/>  
</rdf:Description>

Turtle

<http://dx.doi.org/10.5962/bhl.title.59991>
     dcterms:language <http://id.loc.gov/vocabulary/iso639-2/eng>.

No terms defined within the Darwin Core namespace have range or domain declarations. However, some terms imported into Darwin Core from Dublin Core do have domain or range declarations. Sections 3.2 and 3.3 of this guide give the declared ranges and domains when they are asserted for such terms.

2.3.1.3 Explicit vs. inferred type declarations (normative)

Because the use of a predicate having a range or domain declaration implies the rdf:type of a resource, data providers SHOULD exercise caution in using any such term in a non-standard way. For example, if the property foaf:familyName were used with a specimen (e.g., to indicate the taxonomic family), that use would imply that the specimen was a foaf:Person. However, it cannot be assumed that all clients will perform the reasoning necessary to infer the rdf:type declarations implied by range and domain declarations. Therefore, if a data provider feels that it is important for a consumer to know that a resource is an instance of a particular class, the provider SHOULD type the resource using an explicit rdf:type triple even if that asserts the same information that could be inferred from a domain or range declaration. For example, if providers of images want to assure that an image will be found in a query for resources having rdf:type foaf:Image, they SHOULD NOT assume that describing the image using the property foaf:depicts will accomplish that because of the range declaration of foaf:depicts. It would be safer to include

<rdf:type  rdf:resource="http://xmlns.com/foaf/0.1/Image"/>

in the description of the image. In fact, the provider would probably also want to include

<rdf:type  rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>

in the description so that clients searching for instances of either foaf:Image or dcmitype:StillImage class resources would find the image.

2.3.1.4 Other predicates used to indicate type (normative)

Both the Dublin Core and Darwin Core define terms that can be used to describe the nature of a resource: dcterms:type and dwc:basisOfRecord respectively. However, using these terms to describe the nature of the subject resource is not a substitute for use of rdf:type. The DCMI notes on RDF semantics RECOMMEND that “applications implementing this specification primarily use and understand rdf:type in place of dcterms:type when expressing Dublin Core metadata in RDF, as most RDF processors come with built-in knowledge of rdf:type.” A similar argument could be made for the use of rdf:type over dwc:basisOfRecord. Including dc:type, dcterms:type, and dwc:basisOfRecord in an RDF description should be considered OPTIONAL, while including rdf:type should be considered strongly RECOMMENDED. A dwciri: analogue (Section 2.5) of dwc:basisOfRecord SHOULD NOT be used. rdf:type SHOULD be used instead when the object is an IRI reference. Here is an example that describes a specimen using several of the terms that define the nature of a resource explicitly, including multiple rdf:type declarations:

Example 8:

RDF/XML

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:165861">
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/PreservedSpecimen"/>
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/PhysicalObject"/>
     <dc:type>PhysicalObject</dc:type>
     <dcterms:type rdf:resource="http://purl.org/dc/dcmitype/PhysicalObject"/>     
     <dwc:basisOfRecord>PreservedSpecimen</dwc:basisOfRecord>
</rdf:Description>

Turtle

<http://arctos.database.museum/guid/MVZ:Mamm:165861>  
     a dwc:PreservedSpecimen,  
       dcmitype:PhysicalObject;  
     dc:type "PhysicalObject";  
     dcterms:type dcmitype:PhysicalObject;  
     dwc:basisOfRecord "PreservedSpecimen".

Refer to Sections 2.4.3 and 2.5 for explanations of the distinctions between terms in the dc:, dcterms:, dwc:, and dwciri: namespaces.

2.3.1.5 Classes to be used for type declarations of resources described using Darwin Core (normative)

The TDWG GUID Applicability Statement standard specifies that an object in the biodiversity domain that is identified by a GUID SHOULD be typed using a well-known vocabulary. With this prescription in mind, it SHOULD be considered a best practice to provide information about the type (i.e., class membership) of any resource that is assigned a persistent identifier in the form of an IRI. Since Darwin Core is a well-known vocabulary and a ratified TDWG standard, its classes SHOULD be used for typing in preference to classes in parts of the TDWG ontology, which are not ratified standards and are effectively deprecated. The human-readable definitions of the Darwin Core classes provide guidance for deciding the types to assign to resources, although community consensus may be necessary to classify some of the more complex kinds of resources. (Section 1.4.4)

Any Darwin Core class IRI MAY be used as a value for rdf:type, although it is not clear whether dwc:ResourceRelationship instances make sense in the context of RDF. The following list summarizes classes included in the Dublin Core type vocabulary that MAY also be used for typing biodiversity-related resources:

dcmitype:StillImage
dcmitype:MovingImage
dcmitype:Sound
dcmitype:PhysicalObject
dcmitype:Text

2.4 Object resources (non-normative)

Section 1.3.1 of the Introduction to this guide shows how the object of an RDF triple can be a expressed as either a string literal or an IRI reference. It is also possible to have non-literal objects that are not identified by an IRI. These are known as blank or anonymous nodes. This section describes how to express objects in each of these three forms. Section 1.4.3 and Section 1.5 of the Introduction explain the issues involved in exposing data for which values as string literals (e.g., names, citations, and codes) are used as proxies for non-literal resources. This section also discusses strategies for expressing such data as RDF.

2.4.1 Literal object resources (normative)

Some resources such as titles, dates, and numbers MAY be intrinsically expressed as strings. In cases where it is appropriate for the object of a triple to be a string, in RDF/XML the string is placed in a container element whose qualified name is the property:

<dwc:catalogNumber>s1987-00397</dwc:catalogNumber>
2.4.1.1 Typed literals (normative)

Because literals cannot be the subjects of RDF triples, it is not possible to describe the properties of literals extensively in RDF. However, specifying a datatype IRI for a literal provides a mechanism that allows an client to interpret the nature of the resource that the string denotes. (See the RDF 1.1 Semantics and the RDF 1.1 XML Syntax documents for details.)

The rdf datatype attribute indicates that the string conforms to a particular format (integer, date, etc.) that maps the string to its abstract value.

Example 9:

RDF/XML

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/hessd/e5240#loc">  
     <rdf:type rdf:resource="http://purl.org/dc/terms/Location"/>  
     <dwc:decimalLatitude  rdf:datatype="http://www.w3.org/2001/XMLSchema#decimal">35.857959</dwc:decimalLatitude>  
     <dwc:decimalLongitude  rdf:datatype="http://www.w3.org/2001/XMLSchema#decimal">-86.298055</dwc:decimalLongitude>  
     <dwc:coordinateUncertaintyInMeters  rdf:datatype="http://www.w3.org/2001/XMLSchema#int">20</dwc:coordinateUncertaintyInMeters>  
</rdf:Description>

Turtle

<http://bioimages.vanderbilt.edu/hessd/e5240#loc>  
     a dcterms:Location;  
     dwc:decimalLatitude "35.857959"^^xsd:decimal;  
     dwc:decimalLongitude "-86.298055"^^xsd:decimal;  
     dwc:coordinateUncertaintyInMeters "20"^^xsd:int.

If the string expresses information in a particular language, a provider SHOULD include an xml:lang attribute to indicate the language of the string through the RFC 4646 language code for that language. In addition to specifying the language of the string, providing a language tag entails that the described resource has the type rdf:langString.

Example 10:

RDF/XML

<rdf:Description rdf:about="http://dx.doi.org/10.1525/auk.2009.09022">
     <dcterms:bibliographicCitation xml:lang="en">S. Claramunt, et al. 2009. Polyphyly of Campylorhamphus, and Description of a New Genus for C. pucherani (Dendrocolaptinae). The Awk 127(2):430-439.</dcterms:bibliographicCitation>
     <dcterms:bibliographicCitation xml:lang="es">S. Claramunt, et al. 2009. Polifilia de Campylorhamphus y la Descripción de un Nuevo Género para C. pucherani (Dendrocolaptinae). The Awk 127(2):430-439.</dcterms:bibliographicCitation>
</rdf:Description>

Turtle

<http://dx.doi.org/10.1525/auk.2009.09022>  
     dcterms:bibliographicCitation "S. Claramunt, et al. 2009. Polyphyly of Campylorhamphus, and Description of a New Genus for C. pucherani (Dendrocolaptinae). The Awk 127(2):430-439."@en,  
                                   "S. Claramunt, et al. 2009. Polifilia de Campylorhamphus y la Descripción de un Nuevo Género para C. pucherani (Dendrocolaptinae). The Awk 127(2):430-439."@es.

In the RDF 1.1 Semantics specification, datatype D-entailment is a direct extension to basic RDF. The entailment rules in that specification establish that literals without explicit datatype attributes or language tags have an implicit datatype xsd:string. That also entails that the rdf:type of those literals is xsd:string. The practical implication of this is that literals that are exposed without datatype attributes or language tags SHOULD be interpreted by clients to be a sequence of characters, and not some other abstract or non-information resource that a human might interpret the sequence of characters to represent. This has practical implications in Section 2.4.3 (where untyped literals are value strings intended to represent non-literal resources) and Section 2.7 (where untyped literals provide a convenient means for facilitating string-based searches). Although it is likely that many providers may initially choose to expose literals without datatype attributes, they should move towards replacing them with URIs or datatyped literals that accurately represent the type and properties of the resource that the untyped literals are intended to represent.

Section 3.4 indicates which Darwin Core terms would be appropriately used with values having datatype or language attributes.

2.4.1.2 Terms intended for use with literal objects (normative)

The definitions of some terms make it clear that they SHOULD be used with literal objects. Darwin Core specifically “imports” several Dublin Core terms into its vocabulary for use in describing biodiversity data. In some cases, terms in the dcterms: namespace have range declarations of rdfs:Literal and are therefore understood to be intended for use with literal objects (strings). In some vocabularies, certain terms are understood to have literal objects because in their definitions they are declared to be owl:Datatype properties. In the case of Darwin Core terms in the dwc: (http://rs.tdwg.org/dwc/terms/) namespace, the normative term definitions in RDF do not include any declarations that indicate whether the terms are intended to be used with literal or IRI reference objects. However, because the dwc: terms were originally designed to accommodate text and XML data transfer, their definitions generally specify how term values ought to be expressed as string literals. This guide establishes the convention that terms in the dwc: namespace SHOULD be restricted to use with literal objects so that their use in RDF will be consistent with their definitions. As discussed in Section 1.4.3 and Section 2.5, this guide introduces a separate namespace http://rs.tdwg.org/dwc/iri/ (abbreviated as dwciri:) for additional Darwin Core terms that are intended to have objects that are IRI references.

2.4.2 Non-literal object resources (normative)

Resources that are physical or conceptual often cannot be intrinsically represented as string literals and if identified, they are referenced in RDF by IRIs. Digital resources (e.g., images, web pages, etc.) could be represented as literals (the encoded content of the resource), but because many characters would be required to do that, they are usually referenced as independent entities through IRIs. In RDF/XML an IRI reference to a non-literal object MAY be made using the attribute rdf:resource in an empty XML element:

<dcterms:rightsHolder rdf:resource="http://biocol.org/urn:lsid:biocol.org:col:15666"/>

A description of the referenced non-literal object might be found within the same document, among data from another provider, or there might be no description of the object. If the RDF document will describe further properties of the non-literal, IRI-identified resource, those properties MAY be placed within an rdf:Description container element having an rdf:about attribute whose value is the IRI of the resource:

Example 11:

<dcterms:rightsHolder>  
     <rdf:Description rdf:about="http://biocol.org/urn:lsid:biocol.org:col:15666"> <dcterms:identifier>FSU</dcterms:identifier>  
     </rdf:Description>  
<dcterms:rightsHolder>

If the non-literal object is not identified by an IRI (i.e., it is a blank node), its properties MAY be placed within an rdf:Description container element that has no rdf:about attribute and which is itself within a container element for the property:

Example 12:

<dcterms:rightsHolder>  
     <rdf:Description>  
           <dcterms:title xml:lang="en">Trustees of the University of Lavonia</dcterms:title>  
     </rdf:Description>  
<dcterms:rightsHolder>
2.4.2.1 When should non-literal object resources be described within the same document? (non-normative)

There are positive and negative aspects to describing a resource within the same document that references it. If the IRI is not dereferenceable, either because the IRI is not a type that can be dereferenced by HTTP (e.g., a URN) or because the issuer of the IRI is temporarily or permanently failing to respond to HTTP calls, then providing minimal information about the resource in the referencing document may be beneficial. For example, if a property referred to a printed book that had an ISBN but no HTTP IRI, as in:

Example 13:

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/taxon/30148-gleason1991">  
     <dcterms:references rdf:resource="urn:isbn:0893273651"/>  
</rdf:Description>

a description providing basic publication data such as:

Example 14:

<rdf:Description rdf:about="urn:isbn:0893273651">  
     <rdf:type rdf:resource="http://xmlns.com/foaf/0.1/Document"/>  
     <dcterms:date  rdf:datatype="http://www.w3.org/2001/XMLSchema#gYear">1991</dcterms:date>  
     <dcterms:title xml:lang="en">Manual of Vascular Plants of Northeastern United States and Adjacent Canada</dcterms:title>  
     <dc:creator>Gleason, Henry A. and Arthur Cronquist</dc:creator>  
</rdf:Description>

could be included as part of the document that references the ISBN in URN form. The RDF shown in Examples 13 and 14 could be represented in Turtle as:

<http://bioimages.vanderbilt.edu/taxon/30148-gleason1991>dcterms:references <urn:isbn:0893273651>.  
<urn:isbn:0893273651>  
     a foaf:Document;  
     dcterms:date "1991"^^xsd:gYear;  
     dcterms:title "Manual of Vascular Plants of Northeastern United States and Adjacent Canada"@en;  
     dc:creator "Gleason, Henry A. and Arthur Cronquist".

However, if the IRI references an object resource whose data are being actively managed by another provider, then any data which are included in the referencing document might become outdated. In that case, it is probably better to simply link the IRI, and let the consumer of the referring document dereference the IRI to retrieve the most up-to-date data about the object resource. In this example:

Example 15:

RDF/XML

<rdf:Description rdf:about="http://www.morphbank.net/?id=541608">  
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
     <dcterms:rightsHolder  rdf:resource="http://biocol.org/urn:lsid:biocol.org:col:15666"/>  
</rdf:Description>

Turtle

<http://www.morphbank.net/?id=541608>a dcmitype:StillImage;  
     dcterms:rightsHolder <http://biocol.org/urn:lsid:biocol.org:col:15666>.

the rights holder object IRI is managed by an institution other than the image owner. That institution might update the data associated with the IRI at any time. So it would probably be best to simply let consumers retrieve data about the rights holder through dereferencing the IRI.

2.4.2.1.1 Objects identified by LSIDs (normative)

In the previous example, the HTTP IRI used as the object of the dcterms:rightsHolder property was an HTTP-proxied form of an LSID. Because an LSID is a URN and therefore a type of IRI, the RDF specification does not prohibit the use of an LSID as an IRI referenced object. However, the TDWG LSID Applicability Guide standard dictates that LSIDs MUST NOT be used as the object of RDF triples (Recommendation 31 of the GUID applicability statement) because a client would not necessarily be able to dereference the LSID to discover additional information about the object resource. The HTTP-proxied version of the LSID SHOULD be used instead (see Section 2.2.3). See the Darwin Core informative ancillary web page for more information about using LSIDs in RDF.

2.4.2.2 Objects which are blank (anonymous) nodes (non-normative)

Under most circumstances, it is desirable to refer to a non-literal object resource by an IRI because omitting an IRI reference makes it impossible to associate an external reference with the object resource. In the following example:

Example 16:

RDF/XML

<rdf:Description rdf:about="http://museum.org/accession/12312">  
     <dcterms:isReferencedBy> <rdf:Description>  
               <rdf:type rdf:resource="http://xmlns.com/foaf/0.1/Document"/>  
               <dcterms:date rdf:datatype="http://www.w3.org/2001/XMLSchema#gYear">2003</dcterms:date>  
               <dcterms:title  xml:lang="en">Collection notes</dcterms:title>  
               <dc:creator>Joe Curator</dc:creator> </rdf:Description>  
     </dcterms:isReferencedBy>  
</rdf:Description>

Turtle

<http://museum.org/accession/12312>  
     dcterms:isReferencedBy [a foaf:Document ;  
                         dcterms:date "2003"^^xsd:gYear ;  
                         dcterms:title "Collection notes"@en ;  
                         dc:creator "Joe Curator"].

the described subject resource refers to an object resource that is not identified with an IRI, that is, an object resource represented by a blank node. From the properties of the unidentified resource we know that the object resource is a foaf:Document from 2003 entitled “Collection notes” and created by Joe Curator. By using a blank node to represent the resource, the properties of that resource can be described and collectively associated with the dcterms:references property without requiring the data provider to mint an IRI for that resource. The data provider may feel that there is no need for another provider to refer to that resource, or the provider may be unwilling or unable to maintain a separate identifier for the resource. For example, in Example 12, the data provider may not have had access to an IRI identifier for the Trustees of the University of Lavonia and might not be interested in taking on the job of assigning one. At some future point, the provider could replace the blank node with an IRI reference if an IRI for the Trustees of the University of Lavonia were discovered.

2.4.3 Object resources that have been previously represented by literals but which are actually non-literal resources (non-normative)

In databases the names of entities have frequently been used to represent the entities themselves. For example, the name of a person is often used as a proxy for the person, or an abbreviation for a language has been used to represent the language itself. Prior to the creation of the DCMI Abstract Model, many data that were described using terms in the legacy Dublin Core namespace dc: (http://purl.org/dc/elements/1.1/) followed the historical practice of using the name of an entity to represent a non-literal entity. Extending this practice to RDF would result in representations such as this:

Example 17:

RDF/XML

<rdf:Description rdf:about="http://dbpedia.org/resource/Starry_night">  
     <dc:creator>Vincent van Gogh</dc:creator>  
</rdf:Description>

Turtle

<http://dbpedia.org/resource/Starry_night>  
     dc:creator "Vincent van Gogh".

However, over time, the community of RDF users has come to consider it a best practice to distinguish between a string (such as a name) and the thing that the string represents (see Using Dublin Core Creator). To make the distinction between strings and the resources they represent, there has been an effort to clarify whether particular terms should be used with literal objects, or with IRI reference objects.

2.4.3.1 Literal values for non-literal resources in Dublin Core (normative)

The introduction of the DCMI Abstract Model (DCAM) and subsequent guidelines for the use of Dublin Core terms in RDF were intended to clarify the use of Dublin Core terms with literal and non-literal objects. In particular, ranges were declared for terms in the dcterms: namespace (http://purl.org/dc/terms/) with the intention of clarifying whether each term was intended for use with a literal or a non-literal value. For example, dcterms:bibliographicCitation has the range rdfs:Literal, while dcterms:creator has range dcterms:Agent. Because the term dcterms:creator has a non-literal range, it SHOULD be used with an object that is an IRI reference as illustrated in the following example:

Example 18:

RDF/XML

<rdf:Description rdf:about="http://dbpedia.org/resource/Starry_night">  
     <dcterms:creator rdf:resource="http://viaf.org/viaf/9854560"/>  
</rdf:Description>

Turtle

<http://dbpedia.org/resource/Starry_night>dcterms:creator <http://viaf.org/viaf/9854560>.

The Dublin Core RDF guidelines provided a mechanism using the term rdf:value to permit legacy string literal data to be associated with Dublin Core terms in the dcterms: namespace that were not intended for use with literal objects. Using this mechanism, a non-literal resource could be represented by a blank node having an rdf:value property whose value was the legacy string literal. This value is known as a “value string”. However, the mechanism that involves using rdf:value as a predicate has not been widely implemented. At the time when the dcterms: terms were defined, terms in the dc: namespace were left without range declarations. Thus it has been considered acceptable in the Dublin Core community to use the dc: namespace terms with legacy string literals (i.e., value strings) as shown in Example 15. Many providers of non-RDF data may have used literal values for terms in the dcterms: namespace that have non-literal ranges. Note that all terms in the dcterms: namespace that have corresponding terms in the dc: namespace (i.e., terms with identical local names sensu Best Practices Recipes) are declared to be rdfs:subPropertyOf those dc: namespace terms. So if a data provider’s non-RDF database contains string values for terms in the dcterms: namespace having non-literal ranges, they SHOULD expose those literals in RDF as values of corresponding dc: terms.

2.4.3.2 Literal values for non-literal resources in Darwin Core (normative)

Because there are many legacy data composed of string values of dwc: namespace (http://rs.tdwg.org/dwc/terms/) terms whose objects actually represent non-literal entities (i.e., value strings sensu DCAM), it is likely that many providers will at least initially expose such data in RDF as string literals served directly from their existing databases, e.g., R2RML. To make it possible for the legacy data to be exposed as RDF while also ensuring that the meaning of those data is preserved, in RDF the literal value of an existing Darwin Core term in the dwc: namespace SHOULD have the same structure as that described in the term’s description, as in Example 19.

Example 19:

RDF/XML

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:115956">  
     <dwc:recordedBy>Oliver P. Pearson | Anita K. Pearson</dwc:recordedBy>  
</rdf:Description>

Turtle

<http://arctos.database.museum/guid/MVZ:Mamm:115956>  
     dwc:recordedBy "Oliver P. Pearson | Anita K. Pearson".

The terms in the dwc: namespace SHOULD NOT be used for IRI reference objects, even if the term definition suggests that the object resource is of a non-literal type. Instead, IRI reference objects SHOULD be used with terms in the dwciri: namespace as defined by this guide in Section 2.5. When a string value is provided as the object of a dwc: namespace term whose definition suggests that the object is of a non-literal type, that string is understood to be serving as a value string.

2.5 Terms in the dwciri: namespace (normative)

Terms in the namespace dwciri: (http://rs.tdwg.org/dwc/iri/) are intended for use with IRI reference objects and MUST NOT be used with literal objects. They MAY be used with blank node objects, although in most cases this will probably be unnecessary.

2.5.1 Definition of dwciri: terms (normative)

If a term in the dwciri: namespace has a corresponding term with the same local name in the dwc: namespace, the dwciri: namespace term is defined to have the same meaning as its dwc: namespace term analogue. In defining a dwciri: term that has a dwc: analogue, the definition of the dwc: term is understood to be modified in the following ways:

  • when a dwciri: term is used as an RDF predicate, its non-literal object SHALL be identified by an IRI reference rather than a string literal
  • the object of the dwciri: term predicate SHOULD be a single resource. If the dwc: term definition specifies that multiple values should be a concatenated list, the resource described by a dwciri: property SHOULD be the subject of a triple for each value on the list. Alternatively, a single triple MAY be used to describe the subject if the object is a single resource composed of component resources described using additional RDF triples.

Several terms in the dwciri: namespace do not have dwc: namespace analogues (dwciri:inCollection, dwciri:toTaxon, dwciri:inDescribedPlace, dwciri:earliestGeochronologicalEra, dwciri:latestGeochronologicalEra, dwciri:fromLithostratigraphicUnit, and dwciri:inDataset). Their definitions are given in Section 3.6.

2.5.2 Using terms in the Darwin Core dwciri: namespace with non-literal objects identified by IRI references (non-normative)

The following example shows how the data from Example 19 could be expressed if IRIs were available to identify the persons whose names composed the literal:

Example 20:

RDF/XML

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:115956">  
     <dwciri:recordedBy rdf:resource="http://viaf.org/viaf/263074474"/>  
     <dwciri:recordedBy rdf:resource="http://museum-x.org/personnel/akp"/>  
</rdf:Description>

Turtle

<http://arctos.database.museum/guid/MVZ:Mamm:115956>dwciri:recordedBy <http://viaf.org/viaf/263074474>,  
                       <http://museum-x.org/personnel/akp>.

where <http://viaf.org/viaf/263074474> is a persistent IRI identifier for the person whose name is “Oliver P. Pearson” and <http://museum-x.org/personnel/akp> is a persistent IRI identifier for the person whose name is “Anita K. Pearson”.

2.5.3 Expectation of clients encountering RDF containing dwc: and dwciri: terms (normative)

A client that encounters a triple having a term from the dwciri: namespace as its predicate SHOULD expect the object of the triple to be an IRI reference and subsequently MAY be able to dereference that IRI to obtain additional information about the entity that it represents. A client encountering a triple having a term from the dwc: namespace SHOULD be prepared to accept a literal object, although it is possible that some data providers unaware of this guide might have used dwc: terms with IRI references as rdf:resource attributes. Application developers should be flexible in their expectations for the values of properties from the dwc: namespace.

2.6 Darwin Core ID terms and RDF (normative)

Darwin Core contains a number of “ID” terms intended to designate identifiers, e.g., dwc:occurrenceID, dwc:identificationID, dwc:locationID, etc. The “ID” terms provide two functions, specifying the class of the resource and indicating that value of the term is an identifier. These functions are illustrated by the non-RDF XML below, which is part of a hypothetical example provided in the Darwin Core XML Guide :

Example 21:

(non-RDF)

<dwc:Identification>  
     <dwc:identificationID>http://guid.mvz.org/identifications/23459</dwc:identificationID>  
     <dwc:identifiedBy>Richard Sage</dwc:identifiedBy>  
     <dwc:dateIdentified>2000</dwc:dateIdentified>  
     <dwc:taxonID>urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721</dwc:taxonID>  
</dwc:Identification>

This example could also be represented by the following database table in which each record (row) represents an dwc:Identification instance and in which each column represents a property of the dwc:Identification instance as indicated by the column heading:

Table 3 (non-normative)

dwc:identificationID dwc:identifiedBy dwc:dateIdentified dwc:taxonID
“http://guid.mvz.org/identifications/23459” “Richard Sage” “2000” “urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721”

In Example 21 and Table 3, the “ID” terms are used to specify both the identifier of a resource that is the subject of the record itself (using the term dwc:identificationID) and to specify an object resource related to the subject resource by a foreign key (using the term dwc:taxonID). Because the ID terms are not designated to be used with subjects or objects specifically, the resource they identify must be made clear by the context in which they are used. In the case of the database table, a pre-existing understanding between the data provider and consumer would indicate that the rows of the table represent dwc:Identification instances and therefore the dwc:identificationID property would provide the identifier of the subject and any other ID terms would refer to object resources that are related to that particular identification instance. In the XML example, the type of the subject resource is made clear through the record’s container element and hence a consumer would know that the dwc:identificationID property referred to the subject resource. In RDF, the two functions (specifying type and referencing an identifier) are handled separately using rdf:type declarations (Section 2.3.1) and defined mechanisms for expressing the identifier of the subject resource (Section 2.2). Because these mechanisms are well-known best practices outside TDWG, they SHOULD be used rather than using the Darwin Core ID terms, which MUST NOT be used when data are expressed as RDF. The following example shows an appropriate way to express the information in Example 21 as RDF:

Example 22:

RDF/XML

<rdf:Description rdf:about="http://guid.mvz.org/identifications/23459">  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Identification"/>  
     <dcterms:identifier>http://guid.mvz.org/identifications/23459</dcterms:identifier>  
     <dwc:identifiedBy>Richard Sage</dwc:identifiedBy>  
     <dwc:dateIdentified  rdf:datatype="http://www.w3.org/2001/XMLSchema#gYear">2000</dwc:dateIdentified>  
     <dwciri:toTaxon  rdf:resource="http://lsid.tdwg.org/urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721"/>  
</rdf:Description>

Turtle:

<http://guid.mvz.org/identifications/23459>a dwc:Identification;  
     dcterms:identifier "http://guid.mvz.org/identifications/23459";  
     dwc:identifiedBy "Richard Sage";  
     dwc:dateIdentified "2000"^^xsd:gYear;  
     dwciri:toTaxon <http://lsid.tdwg.org/urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721>.

The following points about the Example 22 should be noted:

  1. In RDF/XML use the rdf:about attribute of an rdf:Description element to specify an IRI identifier used with the subject ID term, i.e., the value of dwc:identificationID is an HTTP IRI and SHOULD therefore be used with the rdf:about attribute. The dcterms:identifier property MAY also be used to express the primary identifier for the subject resource as a literal. In Example 22, the HTTP IRI is considered the primary identifier for the Identification instance so it is included as a string value of dcterms:identifier as well as the IRI of the subject resource. Refer to Section 2.2.1 and 2.2.2 for more details.
  2. Data providers who want to relate a subject resource to related non-literal resources SHOULD use object properties (i.e., properties that relate IRI-identified instances to other IRI-identified instances) from a well-known vocabulary or ontology. Darwin Core does not generally define object properties that connect its core classes and in those cases users will have to find object properties outside of Darwin Core (see the Darwin Core informative ancillary web page] for examples). In this example, the term dwciri:toTaxon (see Section 2.7.4) is used to relate the dwc:Identification instance to a taxon instance. (Please note that this is for illustration purposes only and this guide takes no position on the nature of taxa or taxon concepts or whether the resource used in this example is actually a taxon or not.)
  3. If an identified object of a triple is a non-literal resource (Section 2.4.2), RDF REQUIRES that it be referenced by an IRI. Although the UUID “d79c11aa-29c1-102b-9a4a-00304854f820:col20120721” is a globally unique and hopefully persistent identifier for the taxon, it is not an IRI. Catalog of Life has created an IRI from the UUID in the form of an LSID:
<urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721>

so expressing the object reference as

<dwciri:toTaxon  rdf:resource="urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721"/>

would be valid RDF. However, best practices (Section 2.4.2.1.1) specify that when LSIDs are the objects of triples, they SHOULD be in HTTP-proxied form. In Example 22, the LSID is proxied using the TDWG LSID resolver.

  1. The class of the subject identification instance (dwc:Identification) is asserted explicitly using rdf:type. The type of the object taxon instance is not stated directly - a client would need to dereference the IRI to discover it.

2.6.1 Unintended consequences of using Darwin Core ID terms in RDF (non-normative)

Note added in 2021-07-15 version:

When the Darwin Core vocabulary was brought into conformance with the Standards Documentation Specification, in order to comply with Section 4.4.2.2, all subproperty declarations were removed from the term metadata. Therefore, the effects described in this section are no longer entailed by RDF metadata describing any Darwin Core terms. This explanation has been retained to explain part of the rationale for why ID terms were not recommended for use with RDF in the original specification.

The previous section showed that using a Darwin Core ID term to indicate the identifier associated with the subject resource is not necessary because there are well-known means in RDF (the rdf:about attribute and the dcterms:identifier property) for exposing the subject’s identifier. However, as shown below, using a Darwin Core ID term to identify an object resource (as shown in the non-RDF XML Example 21) would actually be problematic. In its normative definition, each Darwin Core ID term is declared to be rdfs:subPropertyOf dcterms:identifier. In RDF, the purpose of a subproperty declaration is to allow a client with reasoning capability to infer a triple containing a broader (and presumably more well-known) property. In the terminology of Dublin Core, the “ID” term is a qualifier which “refines” a basic Dublin Core term and the process of inferring a broader meaning from a more specific term is called a “dumb-down” operation. If a provider attempting to expose the data of Table 3 as RDF used the dwc:taxonID term as a property of the identification as shown in the (incorrect) Example 23:

Example 23:

RDF/XML (incorrect usage)

<rdf:Description rdf:about="http://guid.mvz.org/identifications/23459">
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Identification"/>
     <dwc:identifiedBy>Richard Sage</dwc:identifiedBy>
     <dwc:dateIdentified rdf:datatype="http://www.w3.org/2001/XMLSchema#gYear">2000</dwc:dateIdentified>
     <dwc:taxonID>http://lsid.tdwg.org/urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721</dwc:taxonID>
</rdf:Description>

Turtle (incorrect usage)

<http://guid.mvz.org/identifications/23459>  
     a dwc:Identification;  
     dwc:identifiedBy "Richard Sage";  
     dwc:dateIdentified "2000"^^xsd:gYear;  
     dwc:taxonID "http://lsid.tdwg.org/urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721".

there would be an undesired effect if a client unfamiliar with Darwin Core performed a “dumb-down” operation (i.e., fell back to the broader meaning of the dwc:taxonID term as dcterms:identifier). The client would infer the triple:

Table 4

Subject Predicate Object
http://guid.mvz.org/identifications/23459 dcterms:identifier “http://lsid.tdwg.org/urn:lsid:catalogueoflife.org:taxon:d79c11aa-29c1-102b-9a4a-00304854f820:col20120721”

where the value of the dwc:taxonID term was the identifier of the subject resource rather than of the object resource as intended by the data provider. This is why data providers will generally need to look outside Darwin Core for object properties that can be used to relate instances of one class to instances of another instead of using the Darwin Core ID terms.

2.7 Darwin Core convenience terms (non-normative)

In several situations, providers of Darwin Core text-based data use a set of hierarchical property/value pairs to unambiguously specify a resource. For example, a database record for a resource collected at N 36.4024°, W 87.02219° might contain the following data:

Table 5

dwc:decimalLatitude dwc:decimalLongitude dwc:geodeticDatum dwc:continent dwc:country dwc:stateProvince dwc:county
“36.4024” “-87.02219” “EPSG:4326” “North America” “United States” “Tennessee” “Robertson”

The data unambiguously specifies the lowest level political subdivision (Robertson County) by including the higher level political subdivisions in the hierarchy and thus differentiates it from other places that are second-order administrative divisions identified by the string “Robertson” (e.g., Robertson County, Texas, US or Robertson County, Kentucky, US). Darwin Core terms that are used to form a hierarchy of literal values are called convenience terms.

2.7.1 What purpose do convenience terms serve? (non-normative)

When expressing the data about resources collected in Robertson County in RDF, it really isn’t necessary to indicate in every record that North America is a parent feature of the United States, that the United States is a parent feature of Tennessee, and that Tennessee is a parent feature of Robertson County. It is only necessary to link the record to an IRI for Robertson County such as <http://sws.geonames.org/4653638/> and a semantic client can discover the parent features by traversing the gn:parentFeature property of features included in the hierarchy. Once a client has discovered the higher level parts of the hierarchy in which it is interested, no additional retrieval of data about the hierarchy is required.

In general, it should not be necessary for a data provider to recreate hierarchical RDF relationships that have already been expressed by a centralized service. For that reason, this guide does not describe best-practices for expressing such relationships in RDF. Nevertheless, there are several reasons why it may be convenient for a data provider to expose literal values from existing text-based data:

  • the provider may be unable or unwilling to discover and link to an IRI for the lowest level of the hierarchy, yet wish to facilitate future discovery of such IRIs through string matching by applications or aggregators.
  • the provider may want to facilitate simple string-based queries (e.g., SPARQL) at any level of the hierarchy.
  • the provider may wish to make it easier for consuming applications to create human-friendly representations of the data in which presenting the string hierarchy would be meaningful.

2.7.2 Literal convenience terms versus a single object property reference (normative)

There are several groups of convenience terms in the dwc: namespace which MAY be used to provide literal values for the purposes listed above (Section 3.6). In the case of each of these groups, it is not expected that a provider will link to IRI references for each level in the hierarchy. Therefore, dwciri: analogues are not defined for those convenience terms from the dwc: namespace. Rather, for each category of convenience terms, there is a single dwciri: namespace term (having no analogue in the dwc: namespace; Section 3.7) that MAY be used to link to the lowest available level in the hierarchy with the understanding that the RDF of the object resource will provide links to other IRIs for higher levels of the hierarchy. Such dwciri: terms MAY refer to any level in the hierarchy if there is uncertainty about the identity of lower levels, or if lower levels do not exist.

Table 6

Category of convenience term Object property Category of object resource rdf:type of example resource
ownership of collection item (Section 2.7.3) dwciri:inCollection collection not specified
description of a taxonomic entity (Section 2.7.4) dwciri:toTaxon taxon concept; taxon name usage dwc:Taxon
names of geographic subdivisions (Section 2.7.5) dwciri:inDescribedPlace geographic place gn:Feature
chronostratographic (geological timescale) description (Section 2.7.6) dwciri:earliestGeochronologicalEra dwciri:latestGeochronologicalEra geochronological time period gsml:GeochronologicEra
lithostratigraphy descriptors (Section 2.7.7) dwciri:fromLithostratigraphicUnit lithostratigraphic unit not specified

2.7.3 Ownership of a collection item (normative)

Historically, the set of values for dwc:institutionCode, dwc:collectionCode, and dwc:catalogNumber (a “Darwin Core triplet”) has been used to identify a collection item and to indicate the owning institution and collection within that institution as shown in Table 7.

Table 7 (non-normative)

dwc:basisOfRecord dwc:institutionCode dwc:collectionCode dwc:catalogNumber dwc:collectionID
“PreservedSpecimen” “MVZ” “Mamm” “115956” “http://grbio.org/cool/0rht-pj95”

In RDF, unique identification of collection items is done through the IRI, which acts as a globally unique identifier for that item. The Darwin Core triplet properties may still be provided as literal values, but ownership/control of the collection item SHOULD be indicated using dwciri:inCollection with an HTTP IRI as the IRI-reference object. For physical specimens, the recommended best practice is to use a collection IRI from a collections registry such as an HTTP IRI from the GBIF Registry of Scientific Collections. Example 24 illustrates this for the data from Table 7.

Example 24:

RDF/XML

<rdf:Description rdf:about="http://arctos.database.museum/guid/MVZ:Mamm:115956">  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/PreservedSpecimen"/>  
     <dwc:institutionCode>MVZ</dwc:institutionCode>  
     <dwc:collectionCode>Mamm</dwc:collectionCode>  
     <dwc:catalogNumber>115956</dwc:catalogNumber>  
     <dwciri:inCollection rdf:resource="http://grbio.org/cool/0rht-pj95"/>  
</rdf:Description>

Turtle

<http://arctos.database.museum/guid/MVZ:Mamm:115956>a dwc:PreservedSpecimen;  
     dwc:collectionCode "Mamm";  
     dwc:institutionCode "MVZ";  
     dwc:catalogNumber "115956";  
     dwciri:inCollection <http://grbio.org/cool/0rht-pj95>.

2.7.4 Description of a taxonomic entity (normative)

The consensus embodied in the TDWG Taxon Concept Transfer Schema (TCS) standard is that identification instances refer to taxon concept instances. Therefore it would be a best practice to describe taxonomic entities in RDF as taxon concepts sensu TCS. However, because the TCS standard is an XML schema, it is not directly translatable to RDF. It is considered to be out of the scope of this document to specify how taxon concepts should be rendered as RDF. Nevertheless, Darwin Core does define many convenience terms listed under the dwc:Taxon class that can be used as properties of dwc:Identification instances (Section 3.5).

It might be argued that these convenience terms would more appropriately be properties of a dwc:Taxon instance. However, the object properties necessary to relate dwc:Taxon instances to name entities, references, parent taxa, and child taxa do not exist and the exact relationship between taxonomic entities such as taxon concepts, protonyms, taxon name usages, etc. has not been established using RDF. So the creation of functional dwc:Taxon instances described using RDF is not possible at the present time. Therefore this document establishes the convention that convenience terms for taxonomic entities SHOULD be properties of dwc:Identification. The task of describing taxonomic entities using RDF will have to be an effort outside of Darwin Core. This guide does establish the object property dwciri:toTaxon for use in relating a Darwin Core identification instance to a taxonomic entity as defined elsewhere.

Consider the following hypothetical example where Takuma Yun identified a spider to the species Hersilia yaeyamaensis using information in Tanikawa (1999). The data about this identification was listed in a database as shown in Table 8.

Table 8 (non-normative)

dwc:identificationID dwc:identifiedBy dwc:order dwc:family dwc:genus dwc:specificEpithet dwc:nameAccordingToID
“75C9EA16-72B1-44C9-AD40-3C3A41323A09” “Takuma Yun” “Araneae” “Hersiliidae” “Hersilia” “yaeyamaensis” “75C9EA16-72B1-44C9-AD40-3C3D41323AB9”

In this example, a best practice would be to link the identification instance to a taxon instance of Hersilia yaeyamaensis sec. Tanikawa 1999 using the object property dwciri:toTaxon as shown in Example 22. However, the data provider may be uninterested, or unable to mint or discover a taxon instance to which the identification instance can be linked. The provider may simply wish to make it easier to discover the identification instance and be unconcerned about the taxonomic relationships that might be asserted for concepts that may be defined for the listed name components. In that case the provider can use the following RDF:

Example 25:

RDF/XML

<rdf:Description rdf:about="http://museum.or.jp/9AC9BD26-8B41-458A-AA35-503A4527D009">  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Identification"/>  
     <dwc:identifiedBy>Takuma Yun</dwc:identifiedBy>  
     <dwc:order>Araneae</dwc:order>  
     <dwc:family>Hersiliidae</dwc:family>  
     <dwc:genus>Hersilia</dwc:genus>  
     <dwc:specificEpithet>yaeyamaensis</dwc:specificEpithet>  
     <dwc:nameAccordingTo>Tanikawa 1999</dwc:nameAccordingTo>  
</rdf:Description>

Turtle:

<http://museum.or.jp/9AC9BD26-8B41-458A-AA35-503A4527D009>  
     a dwc:Identification;  
     dwc:identifiedBy "Takuma Yun";  
     dwc:order "Araneae";  
     dwc:family "Hersiliidae";  
     dwc:genus "Hersilia";  
     dwc:specificEpithet "yaeyamaensis";  
     dwc:nameAccordingTo "Tanikawa 1999".

In the example, providing the triple

<http://museum.or.jp/9AC9BD26-8B41-458A-AA35-503A4527D009> dwc:order  "Araneae"

should not be taken to imply that Takuma Yun asserted that the spider he identified was classified within the order Araneae, nor should the RDF be assumed to imply that Takuma Yun asserted that Aranaeae is the name of a parent taxon of the genus Hersilia. Those sorts of assertions would need to be made using more complex RDF and a more expressive vocabulary outside of Darwin Core. The RDF simply makes it easier to search for spider identifications having dwc:order of “Araneae”, dcw:genus of “Hersilia”, and a specific epithet of “yaeyamaensis”. If it can be determined (perhaps at a later time) that the taxon described by the convenience terms corresponds to a particular IRI-identified instance, the identification instance can be linked to it using an object property, e.g.,

<http://muse.or.jp/9AC9BD26-8B41-458A-AA35-503A4527D009> dwciri:toTaxon <http://zoobank.org/75C9EA16-72B1-44C9-AD40-3C3D41323AB9>

2.7.5 Names of geographic subdivisions (normative)

The data from Table 5 can be expressed as shown in Example 26. The term dwciri:inDescribedPlace SHOULD be used as an object property to link the dcterms:Location instance to an IRI for the lowest known geographic subdivision which applies to the locality. dwc:locality MAY also be used to provide a string literal description of the specific description of the place.

Example 26:

RDF/XML

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/baskauf/00001#loc">  
     <rdf:type rdf:resource="http://purl.org/dc/terms/Location"/>  
     <dwc:decimalLatitude  rdf:datatype="http://www.w3.org/2001/XMLSchema#decimal">36.4024</dwc:decimalLatitude>  
     <dwc:decimalLongitude  rdf:datatype="http://www.w3.org/2001/XMLSchema#decimal">-87.02219</dwc:decimalLongitude>  
     <dwc:geodeticDatum>EPSG:4326</dwc:geodeticDatum>  
     <dwc:continent>North America</dwc:continent>  
     <dwc:country>United States</dwc:country>  
     <dwc:stateProvince>Tennessee</dwc:stateProvince>  
     <dwc:county>Robertson</dwc:county>  
     <dwciri:inDescribedPlace rdf:resource="http://sws.geonames.org/4653638/"/>  
</rdf:Description>

Turtle

<http://bioimages.vanderbilt.edu/baskauf/00001#loc>a dcterms:Location;  
     dwc:decimalLatitude "36.4024"^^xsd:decimal;  
     dwc:decimalLongitude "-87.02219"^^xsd:decimal;  
     dwc:geodeticDatum "EPSG:4326";  
     dwc:continent "North America";  
     dwc:country "United States";  
     dwc:stateProvince "Tennessee";  
     dwc:county "Robertson";  
     dwciri:inDescribedPlace <http://sws.geonames.org/4653638/>.

Because generic RDF places no restrictions on repeating properties, a dcterms:Location instance could have multiple dwciri:inDescribedPlace properties if the location is included within several described geographic subdivisions. For example, a particular location could be included within <http://sws.geonames.org/4626068/> (The Great Smoky Mountains National Park, which straddles two states) and <http://sws.geonames.org/4656568/> (Sevier County, Tennessee, US, which is the lowest level political subdivision).

2.7.6 Chronostratographic (geological timescale) descriptors (normative)

The following example is taken from http://dx.doi.org/10.1098/rsbl.2011.0228, which involves the geological context of a fossil serving as a holotype for a species description. In this example (Table 9), there is a single value given for the Epoch (Middle Jurassic), so the values for each of the earliest.../latest... stratigraphic timescale term pairs SHOULD be the same.

Table 9 (non-normative)

dwc:formation dwc:earliestEonOrLowestEonothem dwc:latestEonOrHighestEonothem dwc:earliestEraOrLowestErathem dwc:latestEraOrHighestErathem dwc:earliestPeriodOrLowestSystem dwc:latestPeriodOrHighestSystem dwc:earliestEpochOrLowestSeries dwc:latestEpochOrHighestSeries
“Jiu-longshan” “Phanerozoic” “Mesozoic” “Jurassic” “Middle”

Example 27 shows how this can be rendered as RDF using the Darwin Core stratigraphic timescale terms as convenience terms.

Example 27:

RDF/XML

<rdf:Description  rdf:about="http://paleo.cnu.edu.cn/ara/nn2010008#context"> <rdf:type  rdf:resource="http://rs.tdwg.org/dwc/terms/GeologicalContext"/> <dwc:formation>Jiu-longshan</dwc:formation> <dwc:earliestEonOrLowestEonothem>Phanerozoic</dwc:earliestEonOrLowestEonothem> <dwc:latestEonOrHighestEonothem>Phanerozoic</dwc:latestEonOrHighestEonothem> <dwc:earliestEraOrLowestErathem>Mesozoic</dwc:earliestEraOrLowestErathem> <dwc:latestEraOrHighestErathem>Mesozoic</dwc:latestEraOrHighestErathem> <dwc:earliestPeriodOrLowestSystem>Jurassic</dwc:earliestPeriodOrLowestSystem> <dwc:latestPeriodOrHighestSystem>Jurassic</dwc:latestPeriodOrHighestSystem> <dwc:earliestEpochOrLowestSeries>Middle</dwc:earliestEpochOrLowestSeries> <dwc:latestEpochOrHighestSeries>Middle</dwc:latestEpochOrHighestSeries> <dwciri:earliestGeochronologicalEra  rdf:resource="http://resource.geosciml.org/classifier/ics/ischart/MiddleJurassic"/> <dwciri:latestGeochronologicalEra  rdf:resource="http://resource.geosciml.org/classifier/ics/ischart/MiddleJurassic"/>  
</rdf:Description>

Turtle

<http://paleo.cnu.edu.cn/ara/nn2010008#context>a dwc:GeologicalContext;  
     dwc:formation "Jiu-longshan";  
     dwc:earliestEonOrLowestEonothem "Phanerozoic";  
     dwc:latestEonOrHighestEonothem "Phanerozoic";  
     dwc:earliestEraOrLowestErathem "Mesozoic";  
     dwc:latestEraOrHighestErathem "Mesozoic";  
     dwc:earliestPeriodOrLowestSystem "Jurassic";  
     dwc:latestPeriodOrHighestSystem "Jurassic";  
     dwc:earliestEpochOrLowestSeries "Middle";  
     dwc:latestEpochOrHighestSeries "Middle";  
     dwciri:earliestGeochronologicalEra <http://resource.geosciml.org/classifier/ics/ischart/MiddleJurassic>;  
     dwciri:latestGeochronologicalEra <http://resource.geosciml.org/classifier/ics/ischart/MiddleJurassic>.

In this example, the object properties dwciri:earliestGeochronologicalEra and dwciri:latestGeochronologicalEra link to an IRI that identifies an instance of the gsml:GeochronologicEra class which uses SKOS to relate the Middle Jurassic epoch to higher levels in the geochronological hierarchy.

2.7.7 Lithostratigraphy descriptors (normative)

Since lithostratigraphic units are hierarchical, the pattern followed with the other hierarchical convenience terms applies to the Darwin Core lithostratigraphic terms categorized under the dwc:GeologicalContext class (dwc:group, dwc:formation, dwc:member, and dwc:bed). The object property dwciri:fromLithostratigraphicUnit SHOULD be used to link the IRI for a lithostratigraphic unit at the lowest appropriate level.

2.8 Darwin Core association terms (non-normative)

Darwin Core contains a number of terms whose local name begins with “associated” (dwc:associatedMedia, dwc:associatedOccurrences, etc.), which are referred to as “association terms” in this guide. Because these terms were designed to link the subject resource to one or more related resources within a flat, text-based data system, they need special handling to represent their values as IRI-reference objects.

2.8.1 What is the purpose of association terms? (non-normative)

The information encoded by a Darwin Core association term property/value pair can be broken down into three components:

  • a link to a related resource
  • a designation of the type of the related resource
  • (for some terms) a description of the nature of the relationship including its direction

The related resource is designated by some sort of identifier present in the literal value. The type of the related resource is implied by the second part of the local name (e.g., “Media”, “Occurrences”, etc.). The definitions of some of the terms (dwc:associatedTaxa, dwc:associatedOccurrences, and dwc:associatedOrganisms) also specify that the nature of the association with the subject resource should also be included in the literal value (“sibling of”, “predator of “, etc.).

2.8.2 Expressing Darwin Core association terms as RDF with literal values (normative)

A database might contain the information shown in Table 10.

Table 10 (non-normative)

dwc:organismID dwc:associatedOrganisms dwc:associatedMedia
“http://bioimages.vanderbilt.edu/ind-durandp/dd343” “sibling of AX3467” “http://bioimages.vanderbilt.edu/durandp/dd343 | http://bioimages.vanderbilt.edu/durandp/dd344”

These data MAY be serialized as RDF using the dwc: namespace literal value terms dwc:associatedOrganisms and dwc:associatedMedia as shown in Example 28.

Example 28:

RDF/XML

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/ind-durandp/dd343">  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Organism"/> <dwc:associatedOrganisms>sibling of AX3467</dwc:associatedOrganisms>  
     <dwc:associatedMedia>http://bioimages.vanderbilt.edu/durandp/dd343 | http://bioimages.vanderbilt.edu/durandp/dd344</dwc:associatedMedia>  
</rdf:Description>

Turtle:

<http://bioimages.vanderbilt.edu/ind-durandp/dd343>  
     a dwc:Organism;  
     dwc:associatedOrganisms "sibling of AX3467";  
     dwc:associatedMedia "http://bioimages.vanderbilt.edu/durandp/dd343 | http://bioimages.vanderbilt.edu/durandp/dd344".

Because the values of the association terms are literals, a consuming client would need to carry out additional processing to determine the identity of the associated resources referenced in the literals. In the case of the value for dwc:associatedOrgansims, the client would have to determine that the substring “AX3467” was an identifier for the organism and determine the nature of the relationship represented by the substring “sibling of”. In the case of the value for dwc:associatedMedia, the client would need to parse the identifiers included in the value string, then determine that those substrings were IRIs.

The advantage of presenting the literal values of Darwin Core association properties via RDF as in Example 28 is that a provider could easily expose existing data with little effort. The disadvantage is that there would be a significant processing burden on consuming clients. It is possible that some literal values would be uninterpretable without additional information from another source. For example, how can the organism identified by “AX3467” be distinguished globally from other organisms that might have also been assigned the identifier “AX3467”?

2.8.3 Expressing Darwin Core association terms as RDF with URI references (normative)

Because a Darwin Core association term property/value pair actually encodes two or more discrete “facts”, it is probably better to represent the information contained in that property/value pair by more than a single triple.

The well-known Dublin Core term dcterms:relation (<http://purl.org/dc/terms/relation>) MAY be used to link related resources. dcterms:relation does not specify the exact nature of the relationship, although it has a number of declared subproperties that more precisely specify kinds and directions of the relationships (for example: dcterms:hasPart, dcterms:isPartOf, dcterms:hasFormat, dcterms:isFormatOf, dcterms:references, dcterms:isVersionOf, etc.). So dcterms:relation is a generic term that MAY be used to indicate that a resource has an unspecified association with some other resource.

The term rdf:type (Section 2.3.1) is the standard property for indicating the type of a resource in RDF. So it SHOULD be used to declare the type of the object resource of a Darwin Core association term property/value pair.

The nature and direction of the association between the subject and object resource MAY be described more precisely if an appropriate term exists for that purpose. For example, in many cases, the relationship between a subject and object resource that are linked by dwc:associatedMedia is depiction. Thus the well known term foaf:depiction MAY be used to link two resources in lieu of, or in addition to dcterms:relation.

Example 29 shows how the data presented in Table 10 may be expressed as RDF using URI-reference properties instead of Darwin Core association properties.

Example 29:

RDF/XML

<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/ind-durandp/dd343">  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Organism"/>  
     <dcterms:relation rdf:resource="http://museum.org/individuals/ax3467"/>  
     <dcterms:relation rdf:resource="http://bioimages.vanderbilt.edu/durandp/dd343"/>  
     <foaf:depiction rdf:resource="http://bioimages.vanderbilt.edu/durandp/dd343"/>  
     <dcterms:relation rdf:resource="http://bioimages.vanderbilt.edu/durandp/dd344"/>  
     <foaf:depiction rdf:resource="http://bioimages.vanderbilt.edu/durandp/dd344"/>  
</rdf:Description>  
<rdf:Description rdf:about="http://museum.org/individuals/ax3467">  
     <dcterms:identifier>AX3467</dcterms:identifier>  
     <rdf:type rdf:resource="http://rs.tdwg.org/dwc/terms/Organism"/>  
</rdf:Description>  
<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/durandp/dd343">  
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
</rdf:Description>  
<rdf:Description rdf:about="http://bioimages.vanderbilt.edu/durandp/dd344">  
     <rdf:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>  
</rdf:Description>

Turtle:

<http://bioimages.vanderbilt.edu/ind-durandp/dd343>a dwc:Organism;  
     dcterms:relation <http://museum.org/individuals/ax3467>;  
     dcterms:relation <http://bioimages.vanderbilt.edu/durandp/dd343>;  
     foaf:depiction <http://bioimages.vanderbilt.edu/durandp/dd343>;  
     dcterms:relation <http://bioimages.vanderbilt.edu/durandp/dd344>;  
     foaf:depiction <http://bioimages.vanderbilt.edu/durandp/dd345>.  
<http://museum.org/individuals/ax3467>  
     dcterms:identifier "AX3467";  
     a dwc:Organism.  
<http://bioimages.vanderbilt.edu/durandp/dd343>  
     a dcmitype:StillImage.  
<http://bioimages.vanderbilt.edu/durandp/dd344>  
     a dcmitype:StillImage.

Notes:

  1. Because there is no well-known term for expressing the relationship “sibling of”, the nature of the relation between the two associated organisms was not represented in the triples.
  2. In this example, both of the associated media items were depictions of the subject organism, so foaf:depiction was used to indicate that. However, it is likely that many associated media items will not depict the subject resource. For example, specimen labels do not depict specimens with which they are associated, nor do still images of habitats depict organisms with which they are associated. Therefore, there is a need for more expressive terms to describe these types of relations more precisely. However, creating such terms is beyond the scope of this guide.

2.8.4 Querying for associated resources (non-normative)

If the strategy outlined in Section 2.8.3 were used, resources associated with a subject resource could be discovered using a SPARQL query similar to Example 30. In that example, is the IRI of a subject resource, and `dcmitype:StillImage` is the type of associated media that would be discovered.

Example 30:

SPARQL

PREFIX dcterms:  <http://purl.org/dc/terms/>  
PREFIX dcmitype:  <http://purl.org/dc/dcmitype/>
SELECT ?resource WHERE {  
 <iri1> dcterms:relation ?resource.  
 ?resource a dcmitype:StillImage.  
 }

2.9 MeasurementOrFact instances (normative)

Darwin Core provides a mechanism for expressing measurements and factual information associated with resources that are described using Darwin Core. Terms from the dwc: namespace that are organized in the dwc:MeasurementOrFact class were designed to express this information using string values in “flat” files. The information MAY be also expressed as RDF using a combination of literal value dwc: namespace terms and IRI value dwciri: terms. It is likely that this information could also be mapped to more expressive terms. However, that sort of translation is beyond the scope of this guide.

Measurement properties MAY be grouped as part of a dwc:MeasurementOrFact instance as shown in Example 31. In order for that instance to have meaning, it MUST be linked to some other resource that is the measured entity. In Example 31, the measurement took place when the occurrence of an organism was documented by its collection as a preserved specimen. The measurement was of a part of the documented organism. Given that the organism itself was preserved, the measurement also applies to the corresponding part of the specimen. Darwin Core does not provide the object properties that would be required to describe precisely how the dwc:MeasurementOrFact instance was related to the dwc:Occurrence instance, the dwc:Organism whose occurrence was recorded, or the dwc:PreservedSpecimen that was collected. In the example, dcterms:relation was used to link the dwc:MeasurementOrFact instance to the dwc:Occurrence instance that was the subject of the database record that served as the source of the data serialized as RDF in Example 31. It is possible for providers to link dwc:MeasurementOrFact instances using more expressive object properties outside of Darwin Core. See the Darwin Core informative ancillary web page for more information.

Example 31

RDF/XML

<dwc:Occurrence rdf:about="http://mczbase.mcz.harvard.edu/guid/MCZ:Mamm:67231">
    <dcterms:relation>
        <dwc:MeasurementOrFact>
            <dwc:measurementType>tail length</dwc:measurementType>
            <dwciri:measurementType rdf:resource="http://purl.obolibrary.org/obo/VT_0002758"/>
            <dwc:measurementValue rdf:datatype="http://www.w3.org/2001/XMLSchema#int">25</dwc:measurementValue>
            <dwc:measurementUnit>mm</dwc:measurementUnit>
            <dwciri:measurementUnit rdf:resource="https://www.wikidata.org/wiki/Q174789"/>
            <dwc:measurementAccuracy rdf:datatype="http://www.w3.org/2001/XMLSchema#decimal">0.5</dwc:measurementAccuracy>
            <dwc:measurementDeterminedDate rdf:datatype="http://www.w3.org/2001/XMLSchema#date">2009-08-22</dwc:measurementDeterminedDate>
            <dwc:measurementDeterminedBy>Ryan B Stephens</dwc:measurementDeterminedBy>
            <dwciri:measurementDeterminedBy rdf:resource="https://orcid.org/0000-0001-8524-9873"  />
            <dwc:measurementMethod>unspecified</dwc:measurementMethod>
            <dwciri:measurementMethod rdf:resource="http://purl.obolibrary.org/obo/MMO_0000160"  />
            <dwc:measurementRemarks  xml:lang="en">Accuracy from significant digits.</dwc:measurementRemarks>
        </dwc:MeasurementOrFact>
    </dcterms:relation>  
</dwc:Occurrence>

Turtle

<http://mczbase.mcz.harvard.edu/guid/MCZ:Mamm:67231> a dwc:Occurrence;  
     dcterms:relation [a dwc:MeasurementOrFact ;   
          dwc:measurementType "tail length" ;   
          dwciri:measurementType <http://purl.obolibrary.org/obo/VT_0002758> ;   
          dwc:measurementValue "25"^^xsd:int ;   
          dwc:measurementUnit "mm" ;   
          dwciri:measurementUnit <https://www.wikidata.org/wiki/Q174789> ;   
          dwc:measurementAccuracy "0.5"^^xsd:decimal ;   
          dwc:measurementDeterminedDate "2009-08-22"^^xsd:date ;   
          dwc:measurementDeterminedBy "Ryan B Stephens" ;   
          dwciri:measurementDeterminedBy <https://orcid.org/0000-0001-8524-9873> ;   
          dwc:measurementMethod "unspecified" ;   
          dwciri:measurementMethod <http://purl.obolibrary.org/obo/MMO_0000160> ;   
          dwc:measurementRemarks "Accuracy from significant digits."@en].

3 Term reference (normative)

This section organizes terms from Darwin Core and other key vocabularies according to their use in RDF. If the use of a term has additional restrictions or implications (e.g., domain and range assertions), they are noted. RECOMMENDED formats and values are given when appropriate.

3.1 Non-Darwin Core terms needed to express fundamental properties in RDF (normative)

term Notes
rdf:type Used to indicate the class of which the resource is an instance. Resources SHOULD be typed using rdf:type, whereas type declarations using dcterms:type and dwc:basisOfRecord are OPTIONAL. See Section 2.3.1.5 for recommended classes to be used with biodiversity resources.
dcterms:identifier Used to relate string literal identifiers to the subject resource. This MAY include string representations of IRIs if they are considered the identifier for the resource.
dcterms:relation Used to link subject and object resources that have an unspecified association.

3.2 Imported Dublin Core terms for which only literal objects are appropriate (normative)

term domain range
dcterms:modified rdfs:Literal1
dcterms:bibliographicCitation dcterms:BibliographicResource rdfs:Literal

3.3 Imported Dublin Core terms that have non-literal objects and corresponding terms that have literal objects (normative)

Term intended for use in RDF with non-literal objects2 range RECOMMENDED values3 Term intended for use in RDF with literal objects
dcterms:language dcterms:LinguisticSystem MARC ISO 639-2 language IRI dc:language
dcterms:license4 dcterms:LicenseDocument Creative Commons license IRI xmpRights:UsageTerms5
dcterms:type rdfs:Class DCMI Type Vocabulary dc:type
dcterms:rightsHolder dcterms:Agent IRI for the agent owning or managing the rights. xmpRights:Owner6
dcterms:accessRights dcterms:RightsStatement A custom RDF rights statement MAY be created describing who can access the resource or an indication of its security status. No literal object analogue exists for this term. The string value MAY be expressed as a property of a blank node.7
dcterms:references IRI for a publication (preferably an HTTP-proxied DOI) related to the subject resource. Use dwc:identificationReferences for a reference consulted in making an taxonomic identification and dwc:associatedReferences for references related to occurrences.

3.4 Terms defined by Darwin Core that are expected to be used only with literal values (normative)

Darwin Core term Notes on expressing as RDF
dwc:eventDate
dwc:georeferencedDate
dwc:dateIdentified
dwc:relationshipEstablishedDate
dwc:measurementDeterminedDate
Best practice as specified in the term definition recommends that they SHOULD be formatted according to ISO 8601-1:2019. There is no defined XML Schema datatype that corresponds exactly to ISO 8601-1:2019, therefore the entire set of possible values cannot be specified using an rdf:datatype attribute. The XML Schema dateTime datatype (xsd:dateTime) which is effectively a subset of ISO 8601-1:2019, MAY be used as an rdf:datatype attribute. However, xsd:dateTime requires the complete series of year, month, day, hour, second (e.g., 002-10-10T12:00:00) and does not permit listing only part of this hierarchy (e.g., only the year) as is allowed in ISO 8601-1:2019.
dwc:eventTime It is RECOMMENDED that the format described by ISO 8601-1:2019 be used. As with the date terms, there is no XML Schema datatype that includes all of the possible values allowed in ISO 8601-1:2019, so there is no generic rdf:datatype attribute that would apply to all possible instances. The XML Schema dateTime datatype (xsd:time) which is effectively a subset of ISO 8601-1:2019 MAY be used as an rdf:datatype attribute although it is limited to values that include hours, minutes, and seconds (e.g., 13:07:56-05:00).
dwc:individualCount
dwc:decimalLatitude
dwc:decimalLongitude
dwc:coordinatePrecision
dwc:pointRadiusSpatialFit
dwc:coordinateUncertaintyInMeters
dwc:minimumElevationInMeters
dwc:maximumElevationInMeters
dwc:minimumDepthInMeters
dwc:maximumDepthInMeters
dwc:minimumDistanceAboveSurfaceInMeters
dwc:maximumDistanceAboveSurfaceInMeters
dwc:startDayOfYear
dwc:endDayOfYear
dwc:year
dwc:month
dwc:day
dwc:footprintSpatialFit
dwc:measurementAccuracy
These terms are expected to have literal values that are numeric. Therefore, an rdf:datatype attribute describing the form of the number SHOULD be used.
dwc:occurrenceRemarks
dwc:eventRemarks
dwc:locationRemarks
dwc:georeferenceRemarks
dwc:identificationRemarks
dwc:taxonRemarks
dwc:organismRemarks
dwc:relationshipRemarks
dwc:measurementRemarks
Because these are remarks, they SHOULD have literal values with an xml:lang attribute.
dwc:catalogNumber
dwc:samplingEffort
dwc:organismName
dwc:verbatimIdentification
dwc:verbatimEventDate
dwc:verbatimLocality
dwc:verbatimElevation
dwc:verbatimCoordinates
dwc:verbatimLatitude
dwc:verbatimLongitude
dwc:verbatimDepth
dwc:verbatumTaxonRank
Based on their term definitions, these terms SHOULD have untyped literal values.
dwc:otherCatalogNumbers There is no simple mapping because of the kinds of identifiers people use and variety of relationships that there may be among identifiers. For non-IRI identifiers expressed as string values, the string MAY be provided as a literal value of dwc:otherCatalogNumbers. Whether this is preferable to providing multiple dwc:catalogNumber properties may depend on community practice. owl:sameAs MAY be used to associate other IRI identifiers with the subject IRI if that is appropriate.
dwc:basisOfRecord MUST be used only with literal value strings consisting of the local name component of Darwin Core class IRIs. Use rdf:type to refer to IRIs that describe the type of the resource.
dwc:dynamicProperties Expected to contain JSON as a literal. Communities of practice MAY choose to use other vocabularies or develop their own vocabularies to express this sort of content directly as RDF.

3.5 Darwin Core convenience terms that are expected to be used only with literal values (normative)

See Section 2.7 for more information on “convenience” terms.

Darwin Core term Notes
dwc:collectionCode
dwc:institutionCode
dwc:ownerInstitutionCode
The subject resource MAY be any resource that is part of a collection. As an alternative, the object property dwciri:inCollection MAY be used to link the subject resource to an IRI for the collection containing the institution that owns or controls the resource.
dwc:kingdom
dwc:phylum
dwc:class
dwc:order
dwc:family
dwc:subfamily
dwc:genus
dwc:genericName
dwc:subgenus
dwc:infragenericEpithet
dwc:specificEpithet
dwc:infraspecificEpithet
dwc:cultivarEpithet
dwc:higherClassification
dwc:vernacularName
dwc:nameAccordingTo
dwc:scientificName
dwc:taxonRank
dwc:scientificNameAuthorship
dwc:nomenclaturalStatus
dwc:namePublishedIn
dwc:namePublishedInYear
dwc:nomenclaturalCode
dwc:originalNameUsage
dwc:taxonomicStatus
dwc:parentNameUsage
dwc:acceptedNameUsage
The subject resource SHOULD be a dwc:Identification instance. See Section 2.7.4 for a discussion of why it NOT RECOMMENDED to use these as properties of dwc:Taxon instances. The object property dwciri:toTaxon MAY be used as an alternative to link the subject dwc:Identification instance to a taxonomic entity such as a taxon, taxon concept, or taxon name usage. It is likely that these taxonomic entities will have a complex structure that differentiates among name entities, name strings, application of a name to a concept, that expresses parent/child and set relationships among entities, and that tracks provenance information about the names, references, and concepts. The flat nature of text-based Darwin Core cannot represent such a complex structure and it is beyond the scope of this guide to describe them.
dwc:higherGeography
dwc:continent
dwc:waterBody
dwc:islandGroup
dwc:island
dwc:countryCode
dwc:country
dwc:stateProvince
dwc:county
dwc:municipality
dwc:locality
The subject resource SHOULD be a dcterms:Location instance. The object property dwciri:inDescribedPlace MAY be used as an alternative to link the subject resource to a standardized place described as part of a hierarchy. See Section 2.7.5 for details. It is likely that providers will want to provide a text value for dwc:locality even if dwciri:inDescribedPlace is used to replace the other hierarchical convenience terms in this category. This is because it is unlikely that a place description at this most specific level (e.g., “15 km N of Essen”) would be represented by a standardized IRI-identified place instance. There is no dwciri: analogue of dwc:locality because if an IRI-identified place were available to represent the locality, the term dwciri:inDescribedPlace would be used to link to it.
dwc:earliestEonOrLowestEonothem
dwc:latestEonOrHighestEonothem
dwc:earliestEraOrLowestErathem
dwc:latestEraOrHighestErathem
dwc:earliestPeriodOrLowestSystem
dwc:latestPeriodOrHighestSystem
dwc:earliestEpochOrLowestSeries
dwc:latestEpochOrHighestSeries
dwc:earliestAgeOrLowestStage
dwc:latestAgeOrHighestStage
The subject resource SHOULD be a dwc:GeologicalContext instance. The object properties dwciri:earliestGeochronologicalEra and dwciri:latestGeochronologicalEra MAY be used as an alternative as described in Section 3.6. See Section 2.7.6 for details.
dwc:lithostratigraphicTerms
dwc:group
dwc:formation
dwc:member
dwc:bed
The subject resource SHOULD be a dwc:GeologicalContext instance. The object property dwciri:fromLithostratigraphicUnit MAY be used as an alternative to link the subject resource to the lowest appropriate unit of a lithostratigraphic hierarchy.

3.6 dwciri: terms having local names that don’t correspond to terms in the dwc: Darwin Core namespace (normative)

Darwin Core term Notes
dwciri:inCollection MAY be used to link any subject resource that is part of a scientific collection to the collection containing the resource. RECOMMENDED best practice is to use IRIs from the GBIF Registry of Scientific Collections. See Section 2.7.3 for usage details.
dwciri:toTaxon MAY be used to link a dwc:Identification instance subject to a taxonomic entity such as a taxon, taxon concept, or taxon name usage. See Section 2.7.4 for usage details.
dwciri:inDescribedPlace MAY be used to link a dcterms:Location instance subject to the lowest level standardized hierarchically-described resource. It is expected that such resources will be linked to higher levels in the hierarchy by the organization minting the IRI. RECOMMENDED best practice is to use IRIs from the GeoNames geographical database. See Section 2.7.5 for usage details.
dwciri:earliestGeochronologicalEra
dwciri:latestGeochronologicalEra
MAY be used to link a dwc:GeologicalContext instance to chronostratigraphic time periods at the lowest possible level in a standardized hierarchy. Use dwciri:earliestGeochronologicalEra to point to the earliest possible geological time period from which the cataloged item was collected and the object property dwciri:latestGeochronologicalEra to point to the latest possible geological time period from which the cataloged item was collected. The organization minting the IRI should link those time periods to higher levels in the hierarchy. RECOMMENDED best practice is to use IRIs defined by the International Commission on Stratigraphy. See Section 2.7.6 for usage details.
dwciri:fromLithostratigraphicUnit MAY be used to link a dwc:GeologicalContext instance to an IRI-identified lithostratigraphic unit at the lowest possible level in a hierarchy. It is expected that such resources will be linked to higher levels in the hierarchy by the organization minting the IRI. See Section 2.7.7 for usage details.
dwciri:inDataset This object property is provided to link a subject dataset record to the dataset which contains it. A string literal name of the dataset MAY be provided using the term dwc:datasetName.

3.7 dwc: namespace terms that have analogues in the dwciri: namespace (normative)

Darwin Core term having a dwciri: analogue with the same local name Notes on the dwciri: analogues
dwc:recordedBy
dwc:identifiedBy
dwc:georeferencedBy
dwc:measurementDeterminedBy
The object is an agent; the value SHOULD be a well-known IRI such as those referenced in the list of sources of controlled values in the Darwin Core informative ancillary web page.
dwc:locationAccordingTo The object is an agent or publication. The value SHOULD be a well-known IRI, such as an HTTP-proxied DOI.
dwc:georeferenceProtocol
dwc:georeferenceSources
dwc:samplingProtocol
The object is a published or well-known reference; the value SHOULD be an IRI version (preferably HTTP proxied) of doi, isbn, issn, etc. if available.
dwc:sex
dwc:lifeStage
dwc:reproductiveCondition
dwc:establishmentMeans
dwc:behavior
dwc:occurrenceStatus
dwc:disposition
dwc:verbatimCoordinateSystem
dwc:verbatimSRS
dwc:geodeticDatum
dwc:verticalDatum
dwc:georeferenceVerificationStatus
dwc:footprintWKT
dwc:footprintSRS
dwc:lowestBiostratigraphicZone
dwc:highestBiostratigraphicZone
dwc:identificationVerificationStatus
dwc:identificationQualifier
dwc:preparations
dwc:typeStatus
dwc:measurementType
dwc:measurementValue
dwc:measurementUnit
dwc:measurementMethod
RECOMMENDED best practice is to use a controlled vocabulary if one is available.
dwc:informationWithheld
dwc:dataGeneralizations
dwc:habitat
If the object property (dwciri: analogue) is used rather than the dwc: property, the object property SHOULD point to a stable resource, which might be a controlled vocabulary.
dwc:fieldNumber
dwc:fieldNotes
dwciri:fieldNumber is an object property whose subject is a (possibly IRI-identified) resource that is the field notes and whose object is a dwc:Event instance. dwciri:fieldNotes is an object property whose subject is a dwc:Event instance and whose object is a (possibly IRI-identified) resource that is the field notes.
dwc:recordNumber dwciri:recordNumber is an object property whose subject is an occurrence and whose object is a (possibly IRI-identified) resource that is the field notes.

3.8 Darwin Core terms for which this guide does not recommend the use of a dwciri: object property (normative)

Darwin Core term Notes
dwc:relationshipOfResource
dwc:relationshipAccordingTo
The non-RDF use of terms organized under the dwc:ResourceRelationship class depends on values for dwc:resourceID, relationshipOfResourceID, and dwc:relatedResourceID, terms which cannot be used in RDF for reasons discussed in Section 2.6. As of November 2014, the RDF/OWL Task Group is seeking a way to express resource relationships as RDF. For the present, dwciri: analogues have not been adopted for these two terms. See the Darwin Core informative ancillary web page for further discussion.
dwc:associatedOccurrences
dwc:associatedMedia
dwc:associatedSequences
dwc:associatedTaxa
dwc:associatedOrganisms
Properties used MAY be dcterms:relation and rdf:type, or terms that indicate more specific relationships as described in Section 2.8 (Darwin Core association terms).
dwc:previousIdentifications There is no consensus object property for associating identifications with resources of other classes. From whatever scheme you have chosen to provide object properties, you SHOULD use same object property as used for the most recent identification but provide an earlier dwc:dateIdentified value.
dwc:organismScope Use rdf:type with a non-literal object. See the comment at http://rs.tdwg.org/dwc/terms/organismScope.

3.9 Chronometric Age extension chrono: terms that have analogues in the chronoiri: namespace (normative)

The Chronometric Age vocabulary extends the core Darwin Core vocabulary. It has a separate namespace for IRI-valued terms, chronoiri:, which operates analogously to the dwciri: namespace.

Chronometric Age term having a chronoiri: analogue with the same local name Notes on the chronoiri: analogues
chrono:chronometricAgeDeterminedBy The object is an agent; the value SHOULD be a well-known IRI such as those referenced in the list of sources of controlled values in the Darwin Core informative ancillary web page.
chrono:chronometricAgeConversionProtocol
chrono:chronometricAgeProtocol
chrono:chronometricAgeUncertaintyMethod
The object is a published or well-known reference; the value SHOULD be an IRI version (preferably HTTP proxied) of doi, isbn, issn, etc. if available.
chrono:earliestChronometricAgeReferenceSystem
chrono:latestChronometricAgeReferenceSystem
chrono:materialDated
RECOMMENDED best practice is to use a controlled vocabulary if one is available.
  1. Recommended format is ISO 8601-1:2019. See notes on date terms in Section 3.4 for further information. 

  2. None of these dcterms: namespace terms have domain declarations. 

  3. For recommended controlled values, see the document “Sources of well-known controlled value IRIs”, accessible from the Darwin Core informative ancillary web page 

  4. For more information about linking a creative work to its license, see the document “Sources of well-known controlled value IRIs”, accessible from the Darwin Core informative ancillary web page 

  5. DCMI does not provide a literal object analogue of dcterms:license. Audubon Core recommends xmpRights:UsageTerms for literals. 

  6. DCMI does not provide a literal object analogue of dcterms:rightsHolder. Audubon Core recommends xmpRights:Owner for literals. However, since xmpRights:Owner is defined by the XMP specification as “a list of legal owners of the resource”, it can only be used to specify the rights owner, not an agent managing the rights. 

  7. See the DCMI accessRights guidelines for an example.